High volume fraction particulate and interpenetrating phase composites (IPC)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Nanocrystalline metals have been an area of great interest in recent years due to their enhanced characteristics. One of the most striking is implied by the Hall-Petch relation: with decreasing grain size the material becomes stronger. This promise is fulf ...
The effects of neutron irradiation on austenitic stainless steels, usually used for the manufacturing of internal elements of nuclear reactors (e.g. the core shrouds), are the alteration of the microchemistry and the microstructure, and, as a consequence, ...
The mechanical properties of continuous fibre reinforced metals (CFRMs) are known to be very sensitive to the selection and composition of the metallic matrix; for aluminium based CFRMs, commercial alloys are not suitable for this purpose. In the present s ...
Owing to its porous cellular structure and polymeric components, wood can be easily shaped in its transversal direction when it is heated and has sufficient water content. Thanks to this thermohydrous behaviour many manufacturing processes such as densific ...
In composite processing, a compressible dry fiber preform is in many cases impregnated by a molten polymeric matrix. The impregnated part is sometimes used as produced, but most often it requires a reheating step before stamping, flow molding or even paint ...
The possibility of decreasing ultimate tensile strength associated with increasing fiber/matrix interfacial sliding is investigated in ceramic-matrix composites. An axisymmetric finite-element model is used to calculate axial fiber stresses versus radial p ...
The evolution of microstructural damage during tensile deformation of pure aluminium reinforced with 10 vol.% alumina short fibres is studied by monitoring the evolution of density and Young's modulus as a function of tensile strain. It is found that Young ...
Molecular dynamics is used to examine the deformation and failure of Al-Si interfaces and of nanocomposites consisting of Al and Si nanograins loaded in tension. The modified embedded atom method, is used to describe the forces and energies in the system a ...
Predictions of the ultimate tensile strength of 3-dimensional fiber-reinforced composites as a function of the fiber statistical strength distribution and fiber geometry (square vs. hexagonal packing) are presented for materials in which the load transfer ...
Recently, high-strength zirconia-toughened alumina (ZTA) ceramic substrates have attracted interest, because they offer much improved mechanical properties over straight alumina, while maintaining advantages such as good thermal conductivity and chemical s ...
