Tensile Behaviour of reinforced ultra-high performance fiber reinforced concrete elements
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The resistance as well as strain hardening and softening properties of UHPFRC depend on the type of matrix and mainly on the initial fibre dosage and final fibre distribution and orientation in the cast element. According to the final fibre distribution an ...
We present an analytical micromechanical model designed to simulate the tensile stress-strain behaviour and failure of damaging composites containing a high volume fraction of reinforcing particles. One internal damage micromechanism is considered, namely ...
This study contributes to our understanding of the damage evolution and fracture behaviour of two-phase materials that combine brittle particles with a ductile matrix. We focus on model composites roughly half-ceramic/half-metal that are produced in-house ...
The resistance as well as strain hardening and softening properties of UHPFRC depend on the type of matrix and mainly on the fibre dosage and final distribution and orientation in the element. The strength and deformability distribution in a thin UHPFRC pa ...
Japan Concrete Institute (JCI) Japan Society of Civil engineers (JSCE) Canadian society for Civil engineering (CSCE) ConMat'092009
Brittle materials such as ceramics, glasses and oxide single crystals find increasing applications in advanced micro-engineering products. Machining small features in such materials represents a manufacturing challenge. Ultrasonic drilling constitutes a pr ...
Motivated by applications in orthopaedic and maxillo-facial surgery, the mechanical behaviour of cortical bone in cyclic overloads at physiological strain rates is investigated. To this end, a new one-dimensional rate-independent constitutive model for com ...
Two of the most widely used methods for the fatigue life prediction of composite materials under variable amplitude (VA) loading patterns are presented in this chapter. The first method is based on the theoretical formulation and use of a damage summation ...
A full rate-dependent cohesive law is implemented in the distinct lattice spring method (DLSM) to investigate the dynamic fracturing behavior of brittle materials. Both the spring ultimate deformation and spring strength are dependent on the spring deforma ...
A statistical model for fracture of aligned-whisker-reinforced metals was used to interpret tensile data of a TiB-reinforced titanium alloy. From this analysis, a TiB whisker strength of 8.0 GPa with a Weibull modulus of 2 was predicted. The analysis is co ...
We perform two-dimensional dynamic fracture simulations of a specimen in biaxial tension, incorporating various distributions of pre-existing microcracks. The simulations consider the spatial distribution of flaws while modeling the discrete failure proces ...
