The microstructure and tensile properties of pure Ni single crystal irradiated with high energy protons
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Proper test and analysis methods are necessary for characterizing the tensile behavior of strain hardening Ultra High Performance Fiber Reinforced Cementitious Composites (UHPFRC) accurately and representatively. In this paper, the direct tensile tests (DT ...
A FeCrCuMnNi high-entropy alloy was produced using vacuum induction melting, starting from high-purity raw materials. The microstructure and mechanical properties of the as-cast FeCrCuMnNi alloy were studied, considering x-ray diffraction (XRD), scanning e ...
Cast-in-place thin layers of Ultra-High Performance Fiber Reinforced Cementitious Composites (UHPFRC) on the specific zones of existing reinforced concrete (RC) bridge decks has been demonstrated to be a technically efficient and economic rehabilitation an ...
This study presents a thermomechanical processing concept which is capable of exploiting the full industrial application potential of recently introduced AlMgZn(Cu) alloys. The beneficial linkage of alloy design and processing allows not only to satisfy th ...
The formation and growth of cracks by irradiation assisted stress corrosion cracking (IASCC) in light water reactor internals is a critical issue for a safe long-term operation of nuclear power plants. The IASCC susceptibility at relatively low dose is dom ...
EPFL2018
Ferritic-martensitic Oxide Dispersion Strengthened (ODS) steels are potential materials for fuel pin cladding in Sodium Fast Reactor (SFR) and their optimisation is essential for future industrial applications. In this paper, a feasibility study concerning ...
Edp Sciences S A2016
The ever-increasing demand for rehabilitation of existing structures and construction of new ones, along with environmental issues of the construction sites represent a heavy burden for society in terms of economy and environment. Meanwhile, Ultra-High Per ...
EPFL2019
Ferritic/martensitic steels are candidate materials for fusion reactor structural components, liquid metal containers of spallation neutron sources, and accelerator driven systems, with good radiation resistance and thermo-mechanical properties. However, e ...
EPFL2015
,
The microstructural changes occurring during drawing and ageing in pearlitic steel wires have been studied using the thermoelectric power (TEP) measurements combined with atom probe tomography (APT) and differential scanning calorimetry (DSC). APT analysis ...
Many engineering alloys and composites combine a ductile matrix with discrete microscopic reinforcing phases, e.g. silicon particles in aluminium alloys, carbides in steels or ceramic particles in metal matrix composites. It is well understood that the mec ...