Quench simulation in superconducting cables using optimized DRP scheme
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The semi-analytical method (SAM) is a fast integral technique for solving small 2-D, time-transient electromagnetic problems in high temperature superconductors (HTS) with transport current and/or applied field. The method in itself is a generalization of ...
Collimation is essential in a high Energy and Intensity hadron collider with SuperConducting magnets, like the LHC at CERN. To improve the cleaning efficiency and to reduce the LHC impedance budget in stable condition and at top Energy, additional 30 Phase ...
Stray field imaging has been extensively utilized in the last 10 wars to perform very high resolution imaging of samples in a single dimension using the massive field gradient present in the fringe of a superconducting magnet. By spinning the sample around ...
New polyimide cable insulation schemes improving the cooling of Nb-Ti superconducting coils were recently developed to face the severe heat loads at which the next generation of superconducting accelerator magnets will work. In order to qualify the new ins ...
The energy ramp and the betatron squeeze at the CERN Large Hadron Collider (LHC) are particularly critical oper- ational phases that involve the manipulation of beams well above the safe limit for damage of accelerator components. In particular, the squeez ...
Knowledge of the hydraulic boundary conditions is a prerequisite for accurate estimates of the quench characteristics of superconducting magnets. A set of routines (Flower) has been designed and interfaced to the code Gandalf to provide a simplified model ...
Bent-crystal channeling is a technique with a potential to increase beam-halo collimation efficiency in high-energy colliders. First measurements at the Tevatron in 2005 have shown that using a thin silicon crystal to deflect the 1-TeV proton beam halo ont ...
The stability is a key issue to design superconducting magnets and to ensure their proper exploitation. This is the case of the imminent operation of the Large Hadron Collider (LHC) accelerator, which requires a good knowledge of the stability margin of it ...
Within the EFDA technology program, CRPP designed and prepared a short length of full size Nb3Sn developmental conductor to be tested in the SULTAN test facility. Nb3Sn strand with a higher specification and low Cu:non-Cu ratio was supplied by Outokumpu. H ...
Recent International Thermonuclear Experimental Reactor (ITER) Model Coils and tests on Nb-3 So Cable in Conduit Conductors (CICC) showed a significant and unexpected increase in the broadness of the transition to the normal state, resulting in degradation ...
