The voltage/current characteristic (n index) of the cable-in-conduit conductors for fusion
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
A simple 0D analytical model for the prediction of the take-off point observed in critical-current or current-sharing tests in cable-in-conduit conductors (CICC) is presented. This may be referred to also as the quench point and defined as the point where ...
The reactive liquid infiltration (RLI) technique, applied to-the MgB2 material, has allowed us to obtain either bulk or wire samples of good transport properties. The evaluation of the voltage-current characteristics, V-I-n, for typical samples, measured b ...
The experiments of Cable-in conduit conductor (CICC) short samples with high proportion of segregated copper strands have been carried out in SULTAN facility last September. These experiments aimed to investigate transient stability and AC losses of CICC c ...
The aim of this work is to determine the existence and degree of the current unbalance of two types of Cable-In-Conduit Conductors (CICC) of the SeCRETS long sample experiment, and its influence on the conductors' performance. The self-field,measurements a ...
In the framework of the conductor optimisation task (CONDOPT) five NbTi subsize cable-in-conduit conductors with parametric variations were fabricated. The DC performance of these conductors tested in the SULTAN test facility [IEEE Trans. Appl. Supercond. ...
The experimental setup for heat slug propagation at zero current and field in the QUench Experiment on Long Length (QUELL) is described and re-evaluated. Eight inductively heated and four resistively heated runs are considered and analyzed with the 1-fluid ...
For large cable-in-conduit conductors, a current unbalance among the strands may be the reason for reduced performance in both de and pulsed operation, The resistance distribution of the strands at the conductor termination has been investigated as the kev ...
An imbalance in the transport current among the strands of a Cable-in-Conduit conductors (CICC) can be associated with the change of their performance. In order to understand and improve the performance of CICC's, it is essential to study the current imbal ...
Knowledge of the hydraulic boundary conditions is a prerequisite for accurate estimates of the quench characteristics of superconducting magnets. A set of routines (Flower) has been designed and interfaced to the code Gandalf to provide a simplified model ...
The German SUpraLeiterTest ANlage (SULTAN) test facility at the Centre de Recherches en Physique des Plasma (CRPP), Villigen, is a worldwide unique tool to test high current superconductors over a broad range of operating conditions. The key component of t ...
