Assessment of the constitutive properties from small ball punch test: experiment and modeling
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The effect of temperature on the crack onset strain (COS) of brittle coatings on polymer substrates was investigated through a series of temperature-controlled tensile tests carried out in situ under an optical microscope. It was observed that the failure ...
The biomedical industry has an increasing demand for dissimilar metal joining processes, which are used for complex configuration designs, such as guidewires and other intravascular interventional devices. Their production becomes more and more challenging ...
We show that steel-magnesium alloy laminated metal composites (LMCs) can be produced by gas pressure infiltration of a liquid magnesium alloy between layers of stacked dimpled steel sheets. Resulting LMCs are amenable to subsequent warm rolling. The LMCs a ...
Ultra High Performance Fibre Reinforced Concretes (UHPFRC) are characterised by high mechanical performance, extremely low permeability and tensile strain hardening. For structural applications, in composite structures they are very well adapted for reinfo ...
Ingots of an oxide dispersion strengthened reduced activation ferritic steel with the Fe-14Cr-2W-0.3Ti-0.3Y(2)O(3) chemical composition (in wt.%) were synthesized by mechanical alloying of elemental powders with 0.3 wt.% Y2O3 particles in a planetary ball ...
The tensile properties of the high-chromium tempered martensitic reduced activation steel Eurofer97 were determined from tests carried out over a wide range of strain-rates on cylindrical specimens. The quasi-static tests were performed with a universal el ...
Soare and Curtin (Acta Mater. 2008; 56:4091-4101, 4046-4061) have recently developed a model of dynamic strain aging in solute-strengthened alloys. Their constitutive law describes time-dependent solute strengthening using rate equations that can be calibr ...
Ternary Au-Cu-Pt alloys, of unequal gold and copper atomic contents and containing 2.5 wt.% Pt, are ordered isothermally at 250 or 400 degrees C after annealing at 650 degrees C and quenching in water. The alloys are characterized by transmission electron ...
Drying shrinkage is modeled at a microscale as a two-stage process of deformation and evacuation of a two-tube vessel system, based on porosimetry evolution. In the first stage water flow is driven by an external evaporation flux. Flow is associated with a ...
This work defines an incompressible, hyperelastic theory of anisotropic soft materials at finite strains, which is tested by application to the experimental response of fiber-reinforced rubber materials. The experimental characterization is performed using ...
