Deformation behaviour and microstructure of nanocrystalline electrodeposited and high pressure torsioned nickel
Related publications (69)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Alkali-silica reaction occurs in concrete between the alkalis contained in the pore solution and silica in the aggregates. Generation of ASR products gives rise to the internal pressures that cause expansion and cracking. Due to its deleterious effect on c ...
Tuning the mechanical properties of metals, including strength, through adjusting the type and/or concentration of added solute elements, has been recognized as an effective way to design and produce materials with desired or optimized mechanical propertie ...
Mo-Ti alloys form solid solutions over a wide range of compositions, with lattice misfit parameters increasing significantly with titanium content. This indicates a strong increase in the critical stress for edge dislocation motion. Here, we probe the tran ...
Plastic deformation in elemental BCC metals and dilute alloys is controlled by the slower of the kink pair nucleation and kink migration processes along screw dislocations. In alloys nucleation is facilitated and migration inhibited, leading to a concentra ...
The formation and growth of cracks by irradiation assisted stress corrosion cracking (IASCC) in light water reactor internals is a critical issue for a safe long-term operation of nuclear power plants. The IASCC susceptibility at relatively low dose is dom ...
Dislocation multiplication in plasticity research is often connected to the picture of a Frank-Read source. Although it is known that this picture is not applicable after easy glide deformation, plasticity theories often assume Frank-Read-type models for d ...
To reveal the operating mechanisms of plastic deformation in an FCC high-entropy alloy, the activation volumes in CrMnFeCoNi have been measured as a function of plastic strain and temperature between 77 K and 423 K using repeated load relaxation experiment ...
New types of metamaterials and architectured material require metallic materials with precise
structural design in the microscale. However, additivemanufacturing of metallic structures in
themicroscale has proven difficult, as the demand for the material q ...
As dynamic interfaces in piezoelectric materials, domain walls can greatly impact the functionality under applied external fields. Recently, conductive domain walls have been found to result in Maxwell-Wagner (M-W)-like dispersion of the lattice strain and ...
The flexibility of the ZIF-8 aperture, which inhibits a molecular cutoff of 3.4 angstrom, can be reduced by rapid heat treatment to obtain CO2-selective membranes. However, the early stages of the structural, morphological, and chemical changes responsible ...