On the strain-hardening of tempered martensitic alloys
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Fracture in metals is controlled by material behavior around the crack tip where size-dependent plasticity, now widely demonstrated at the micron scale, should play a key role. Here, a physical origin of the controlling length scales in fracture is identif ...
Polycrystalline materials with crystallite diameters below hundred nanometer exhibit extraordinary strength which goes along with a decrease in ductility. In order to tailor tough materials, which combine strength and ductility, the underlying deformation ...
In the quest of materials for the first wall of the future fusion reactor, it has been shown that oxide dispersion strengthened (ODS) ferritic / martensitic (F/M) steels appear to be promising candidates. The inherent good mechanical properties supported b ...
The purpose of the study is to characterize the main features of the anisotropic mechanical behaviour of a shale (Opalinus Clay), and to identify an anisotropic constitutive framework adapted to the response of the material under mechanical perturbations. ...
The resistance as well as strain hardening and softening properties of UHPFRC depend on the type of matrix and mainly on the fibre dosage and final distribution and orientation in the element. The strength and deformability distribution in a thin UHPFRC pa ...
Japan Concrete Institute (JCI) Japan Society of Civil engineers (JSCE) Canadian society for Civil engineering (CSCE) ConMat'092009
The first reported tensile semi-solid stress/strain data for as-cast magnesium alloy Mg Al3 Zn1 are provided. The results show that the maximum tensile stress at the solidus temperature (460 degrees C) was 13 MPa. Furthermore, this alloy has no ductility a ...
Ultra High Performance Fiber Reinforced Concretes (UHPFRC) present outstanding mechanical properties and a very low permeability. Those characteristics make them very attractive for the rehabilitation of existing structures and the conception of new struct ...
The resistance as well as strain hardening and softening properties of UHPFRC depend on the type of matrix and mainly on the initial fibre dosage and final fibre distribution and orientation in the cast element. According to the final fibre distribution an ...
The combined effect of dislocation source strength tau(s), dislocation obstacle strength tau(obs), and obstacle spacing L(obs) on the yield stress of single crystal metals is investigated analytically and numerically. A continuum theory of dislocation pile ...
