On the relationship between the microstructure and the mechanical properties of an ODS ferritic/martensitic steel
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Ceramics are known to be chemically stable, and the possibility to electrically dope polymer-derived ceramics makes it a material of interest for implantable electrodes applications. We investigated cytotoxic characteristics of four polymer-derived ceramic ...
Microstructures in serpentine samples recovered from deformation experiments performed at high pressure (1-8 GPa), high temperature (150-500 degrees C), and laboratory strain rates (4 10(-4)-10(-6)s(-1)) were studied using transmission electron microscopy ...
W-2Y, W-1Y(2)O(3) and W-2Y(2)O(3) materials have been fabricated using two different powder metallurgy methods. While W-2Y and W-1Y(2)O(3) have been fabricated using mechanical alloying and hot isostatic pressing (Hipping), W-2Y(2)O(3) has been fabricated ...
Semiconductor nanowires have increased the palette of possible heterostructures thanks to their more effective strain relaxation. Among these core shell heterostructures are much more sensitive to strain than axial Ones. It is now accepted that the formati ...
Five different grain sizes are produced in 0.17 wt% carbon steel using varying rates of cooling from austenitization temperatures. Controlled furnace cooling from 1100 °C and 950 °C produces coarse ferrite grains of 40 µm and 32 µm diameter, respectively, ...
Micro-compression experiments were carried out on micro-pillars, with nominal diameter of 10 mu m and height 20 mu m, and fabricated from a high-chromium tempered martensitic steels developed for nuclear applications. An analytical method was proposed to c ...
Molecular dynamics simulation is used to study the formation of the a(0) < 1 0 0 > binary dislocation junction in body-centered cubic Fe. Results show that under an applied strain two intersecting 1/2 a(0) < 1 1 1 > dislocations, one mobile edge and one im ...
We studied the interdependent effects of phosphate, silicate and Ca on the formation of Fe(III)-precipitates by oxidation of 0.5 mM Fe(II) in near-neutral bicarbonate-buffered aqueous solutions at concentrations relevant for natural water resources. Comple ...
Plane-strain tensile loading numerical simulations of dynamic crack propagation in silicon nitride microstructures are conducted. The strength and toughness are evaluated as a function of strain rate and microstructural parameters, including grain size and ...
Zirconium is always present in Ni base superalloys as it enhances their creep properties. In the present study, the influence of very small Zr additions, 100–400 ppm, i.e. 0.01–0.04 wt.%, on hot tearing of IN738LCsuperalloy is experimentally investigated u ...
