Neodymium-deficient nickelate oxide Nd1.95NiO4+ı as cathode material for anode-supported intermediate temperature solid oxide fuel cells
Related publications (66)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Results concerning the coupling of the steam reforming and total oxidn. of methanol in a two-passage reactor are presented. A com. available copper-based catalyst is used for the steam reforming. For the total oxidn., a highly active cobalt oxide catalyst ...
The aim of this work is to develop a microstructured reactor based on filamentous catalysts for the Oxidative Steam-Reforming of Methanol (OSRM), to produce hydrogen as feed for a fuel cell, in an autothermal way. Hydrogen is produced by the methanol Steam ...
The aim of this Note is to predict by means of large eddy simulations the three-dimensional structures and secondary mass and heat fluxes which develop within a heated curved duct, for applications to rocket engines cooling channels. We show the existence ...
Maintaining a fuel cell system in correct operating conditions when subjected to fast load changes requires good system control. Best results are typically achieved using model based control strategies. This paper elaborates a control oriented PEM fuel cel ...
When running a fuel cell system in load following mode, several operating points (i.e. a combination of gas flow rates, pressures, humidities, temperatures and current density) can provide the required net power. Typically, only one of those operating poin ...
The properties of sealing materials are important for the performance and reliability of solid oxide fuel cells (SOFC). Even if the properties of a sealing material can be studied separately, it remains difficult to quantify the effect of an imperfect seal ...
Progress on anode supported cell stacks (SOFCONNEX design, 50 m2 per cell) is presented. A 6-cell stack and a 8 cell-stack were mounted and tested with hydrogen fuel at 800 degre C, yielding 100 W el and 140 W el, corresponding to a power density of 1kW el ...
A simple technique for microstructuring ceramic thin films by micromachining substrates using standard photolithographic techniques was investigated. The ceramic perovskite is used to illustrate the method because of its importance for the fabrication of e ...
Polymer electrolyte and solid oxide are the two fuel cell types (PEFC, SOFC) under development in Switzerland. The very distinct operating temperatures of 80 °C (PEFC) and 800–950 °C (SOFC) impose fundamentally different requirements upon the nature of the ...
The use of ammonia as a source of hydrogen for fuel cells has received little attention until now. Ammonia offers several advantages over hydrogen as a fuel and is produced commercially in massive quantities and as a biogas. This paper describes the result ...