Fracture strength and Young's modulus of ZnO nanowires
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Five different grain sizes are produced in 0.17 wt% carbon steel using varying rates of cooling from austenitization temperatures. Controlled furnace cooling from 1100 °C and 950 °C produces coarse ferrite grains of 40 µm and 32 µm diameter, respectively, ...
Bio-chemical processes have recently become the core of several studies in the geoengineering field, where the emphasis is placed on new and emerging applications. Microbially Induced Calcite Precipitation has been introduced as an alternative cementation ...
This paper explores the system of laminated annealed glass beams post-tensioned through stainless steel tendons bonded to the lower glass edge. The tendons are first pre-tensioned and then adhesively bonded to the glass. The compressive pre-stress applied ...
The microstructural changes occurring during drawing and ageing in pearlitic steel wires have been studied using the thermoelectric power (TEP) measurements combined with atom probe tomography (APT) and differential scanning calorimetry (DSC). APT analysis ...
This research investigated the evolution of tensile, hardness, and fracture properties of Eurofer97 tempered martensitic steel following neutron irradiation. The irradiation-hardening was measured with Vickers hardness tests on broken parts of sub-sized co ...
A W-2Y(2)O(3) composite has been developed by powder metallurgy methods in collaboration with the Plansee Company (Austria). The microstructure of the composite was analyzed using transmission electron microscopy and electron backscatter diffraction in sca ...
We present a detailed experimental procedure for the quantitative determination of mechanical properties and full-field strain measurement of rock material under dynamic loads. Three kinds of testing methods, i.e., notched semi-circular bending, Brazilian ...
Photodegradation of wood leads to discolouration and delignification, inducing damage to the cellular structure. This study is an investigation of the damage and loss of tensile strength of the cellulose fibres in spruce (Picea abies). Microtensile tests i ...
Embrittlement by helium was investigated in a lamellar TiAl alloy under two conditions: Specimens were implanted to various amounts of helium up to 762 appm at temperatures from 630 °C to 1000 °C and some of them subsequently creep-tested at the same tempe ...
The Forming Limit Diagram (FLD) of a textured zinc sheet has been identified via tensile and bulge tests. The strong anisotropy of the sheet is reflected in the tensile tests, and even more strikingly in the formability measured from the bulge tests. The d ...
