Experimental and Numerical Study of the Thermal Performance of a Film Cooled Turbine Platform
Related publications (77)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The first cool-down of the EDIPO (European DIPOle) test facility is foreseen to take place in 2011 by means of the existing 1.2 kW cryoplant at EPFL-CRPP Villigen. In this work, the thermo-hydraulic analysis of the EDIPO cool-down is performed in order bot ...
The mean value of turbine entry temperature increased to improve efficiency and specific power. Due to the combustor characteristics, thermal and aero-dynamics non-uniformities can be individuated at the turbine inlet section. Then, a further increase in t ...
Reduction of the specific fuel consumption of gas turbines can be achieved by maximizing the turbine inlet temperature. However, this requires a detailed understanding of the cooling performance in order to ensure safe and economical operation of the engin ...
Fragmented solid targets made of either fluidised tungsten powder or static pebble bed of tungsten spheres, have been long proposed and are being studied as an alternative configuration towards high-power (>1 MW of beam power) target systems, suitable for ...
Film cooling experiments are commonly performed with Pressure Sensitive Paint (PSP). The oxygen sensitive probe molecules allow for measurement of the adiabatic film cooling effectiveness by detecting the concentration of a tracer-gas with different oxygen ...
The penetration of a jet of fluid into a traversal moving stream is a basic configuration of a wide range of engineering applications, such as film cooling and V/STOL aircrafts. This investigation examines experimentally the effect of blowing ratio of fans ...
American Soc Mechanical Engineers, Three Park Avenue, New York, Ny 10016-5990 Usa2010
An end-wall cooling geometry with both fan-shaped and cylindrical holes is tested. The test case is composed by a linear cascade with cylindrical blades, the cooling holes disposed over eight rows. Each row is disposed along iso-Mach lines to ensure same b ...
Microcellular Al-4.5 wt pct Cu of 400- or 75-mu m average pore diameter is solidified at cooling rates ranging from -30 K/min to -0.45 K/min (-30 A degrees C/min to -0.45 A degrees C/min). In the 400-mu m pore size samples, the dendritic character is lost, ...
The application of flow boiling in microchannels in copper cooling elements for very high heat flux dissipation from microprocessor chips is one of the promising technologies to replace air cooling and water cooling of these units, particularly in mainfram ...
Experimental results on the fire endurance of full-scale glass fiber-reinforced polymer (GFRP) composite columns are reported in this paper. The pultruded four-cell profiles were first loaded to axial compression (uniform serviceability stress of 5 MPa) an ...