High coupling materials for thin film bulk acoustic wave resonators
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
everal SrTiO3 (STO) thin films without electrodes processed by pulsed laser deposition, of thicknesses down to 40 nm, were studied using infrared transmission and reflection spectroscopy. The complex dielectric responses of polar phonon modes, particularly ...
The converse piezoelectric response of Pb(ZrxTi1−x)O3 ceramics is investigated as a function of material composition. The effects of the crystallographic phase and different dopants on piezoelectric nonlinearity are separately examined. For a linear depend ...
Piezoelectric materials are used in a wide range of applications, with lead zirconate titanate (PZT) ceramics being the dominant family of materials, due to high piezoelectric coefficients, dielectric permittivity and coupling factors. The high properties ...
The piezoelectric properties of 31-mode resonators of lead zirconate titanate ceramics under hydrostatic pressure from 0.1 to 325MPa were evaluated by a fitting method, in which mechanical loss was taken into account. Our results based on the fitting metho ...
Today's consumer electronics based on a large variety of time-keeping and frequency reference applications is based on quartz-crystal oscillators, because of their excellent performances in terms of quality factor, thermal and frequency stability. However, ...
Configuration of domain walls in undoped and Fe+3-doped lead zirconate titanate (PZT) ceramics at the morphotropic phase boundary has been investigated by the transmission electron microscopy. The distance between domain walls in undoped PZT is on the orde ...
We report on a photonic crystal (PhC) etched into a 380 nm thick lithium niobate (LN) thin film deposited on a MgO substrate by pulsed laser deposition. The transmission properties of this device were assessed by optical near-field measurements and compare ...
Piezoelectric thin films have existing and promising new applications in microwave filter technologies. The final performance depends on many parameters, and very specifically on the materials properties of each involved material. In this article, material ...
The mechanism of the giant unipolar strain recently observed in a lead-free piezoceramic, 0.92(Bi0.5Na0.5)TiO3-0.06BaTiO(3)-0.02(K0.5Na0.5)NbO3 [S.-T. Zhang, A. B. Kounga, E. Aulbach, H. Ehrenberg, and J. Rodel, Appl. Phys. Lett. 91, 112906 (2007) was inve ...
We report on the experimental investigation of a high-frequency (1 MHz-1.8 GHz) dielectric dispersion in unpoled and poled Pb(Zr,Ti)O-3 ceramics. Two overlapping loss peaks could be revealed in the dielectric spectrum. The linear dependence between the low ...
