Non-symmetrical punching of flat slabs and slab bridges without transverse reinforcement
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Reinforced concrete flat slabs are extensively used in buildings and parking garages. Their design is governed by deflection at the serviceability limit state and punching shear at the ultimate limit state. When no punching shear reinforcement is provided, ...
The contributions assembled in the present volume proceed from the lectures of the 2009 ALERT Geomaterials School devoted to the Failure in the multiphase geomaterials. The multiphase behaviour of geomaterials used to be mainly considered from the point of ...
Flat slabs are commonly used in buildings due to their easiness of construction and economy. In order to keep these advantages, columns are usually not continuous through the slabs in multi-storey buildings. In these cases, the slabs are subjected to large ...
Ultra-high performance fiber reinforced concrete (UHPFRC) can be implemented in combination with steel reinforcing bars to enhance the performance of UHPFRC elements subject to shear stresses. This paper presents an experimental investigation into the beha ...
This paper describes an experimental study of two joint configurations, one with only reinforced polymer concrete (RPC) infill, the other with RPC infill and bonded GRP plates, to overcome shear and moment discontinuities in GRP bridge decks transverse to ...
Shear failure mode and strength of artificial rock joints are studied under different levels of joint compression. A quasi-static discrete element modeling is presented that reproduces the brittle material as a dense assemblage of deformable triangular par ...
A large number of medium and small span bridges in Switzerland and in other countries are slab bridges, often prestressed, multi-span and supported by columns. Punching in such structures is typically governing at failure. So far, the knowledge of the infl ...
This paper presents a model to predict the shear resistance of the unreinforced lightweight concrete core of a recently developed hybrid sandwich concept for bridge decks. The sandwich skins consist of a fiber-reinforced polymer (FRP) composite sheet for t ...
The traditional approach of codes of practice for estimating the punching strength of shear-reinforced flat slabs is based on the assumption that concrete carries a fraction of the applied load at ultimate while the rest of the load is carried by the shear ...
The stress field method, which is based on the lower bound theorem of plasticity, provides an unlimited number of solutions allowing to carry the applied loads to the supports for a given structure. This possibility which gives a large freedom to designing ...
