SMD pressure and flow sensor for compressed air in LTCC technology with integrated electronics
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
We present the first single-chip array of integrated NMR receivers for parallel spectroscopy and imaging. The array, optimized for operation at 300 MHz, is composed of eight separate channels, with each channel consisting of a detection coil, a tuning capa ...
We have designed and fabricated a low-range (ca. 100 mN) thick-film piezoresistive force sensor with a cantilever beam fabricated in LTCC (Low Temperature Co-fired Ceramic). The beam was soldered onto a standard thick-film 25.4 x 12.7 mm signal conditionin ...
In this letter, we present a reconfigurable reflectarray cell operating at 12 GHz and fabricated in a monolithic MEMS process. A 5-bit digital control allows reconfiguration of the reflection phase over the full 360deg range, while alleviating the impact o ...
Institute of Electrical and Electronics Engineers2008
Since the emergence of Silicon On Insulator (SOI) technology the research activities have been concentrated on a detailed analysis of SOI devices and their use in different application fields (low-voltage, low-power circuits, high temperature electronics, ...
In this paper,we present an inductive proximity sensor with fully integrated electronics. The sensor with the compact hybrid configuration is composed of a sensing flat coil and an integrated electronic interface. We focused during the development on the t ...
In this work, a novel low-temperature thick-film system (dielectrics, resistors and conductors) is characterised for application on substrates, which cannot be exposed to the standard high-temperature 850 C thick-film firing cycle. Aluminium alloy sheets a ...
