Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Solders are widely used as interconnect material for the electronic industry. The solder interconnect provides both electrical contact and mechanical connection between the integrated circuit devices and their substrate. Thus solders with good reliability ...
In the present paper the experimental results of in-plane shear tests on masonry walls subject to cyclic loads under constant axial load and externally strengthened with composite grid embedded in a cementitious matrix are synthetized. The experimental res ...
A model for predicting composite material strength degradation under elevated and high temperatures is proposed. This model is based on the morphology of the mixture of materials in different states. The degradation of resin-dominated shear strength can be ...
In the present work, an attempt has been achieved to describe the effects of ageing and of water on the hydro-mechanical behaviour of chalks from underground quarries of northern Parisian basin. Physical and mechanical properties were obtained as a functio ...
Limestone in volcanic basements has been identified as a hazard in terms of edifice stability due to the propensity of calcite to decompose into lime and CO2 at high temperatures (>600 °C), causing a decrease in mechanical strength. To date, such hypoth ...
Pressure tunnels are in operation subjected to internal water pressure. When the hoop tensile stress acting at the lining intrados exceeds the tensile strength of concrete, longitudinal cracks occur in the concrete lining. As a consequence of crack opening ...
The biomedical industry shows increasing interest in the joining of dissimilar metals, especially with the aim of developing devices that combine different mechanical and corrosive properties. As an example, nickel titanium shape memory alloys joined to st ...
The larger structures are, the lower their mechanical strength. Already discussed by Leonardo da Vinci and Edme Mariotte several centuries ago, size effects on strength remain of crucial importance in modern engineering for the elaboration of safety regula ...
From their discovery, CNTs have increasingly attracted interest because of their peculiar electrical, mechanical, and chemical properties. In 1991, Sumio Iijima first observed and described in detail the atomic arrangement of this new type of carbon struct ...
The present work forms part of an ongoing effort at the Laboratory of Polymer and Composite Technology (LTC) to develop novel solvent-free processing methods for next generation resorbable porous scaffolds for bone replacement, based on supercritical carbo ...
