Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Although ohmic H-modes have long been produced on the TCV tokamak and the effects of ELMs at the divertor targets studied in some detail [1], no attempt has yet been made to model the scrape-off layer (SOL) in these plasmas. This contribution describes det ...
In this paper we discuss the predictive analysis performed in support of the test program of the International Thermonuclear Experimental Reactor (ITER) Poloidal Field Conductor Insert (PFCI). A subset of the test program items was considered, with particu ...
Significant interaction of ELM filaments with the vessel wall is now observed on JET by several diagnostics. To interpret the experimental data, a model of ELM-filament evolution was developed, with the radial velocity taken from experiment and the decay o ...
Almost since the first density profile measurements were made in the scrape-off layer (SOL) of the early tokamaks, it has been recognized that the rate of particle transport perpendicular to magnetic surfaces exceeds that expected on the basis of classical ...
There is an increasing body of evidence that the energy lost from diverted tokamak plasmas due to edge localized mode (ELM) activity may not be confined solely to deposition on divertor components. Plasma-facing surfaces in the main confinement chamber als ...
Almost all optical diagnostics systems on ITER will be based on in-vessel metallic first mirrors. The possible deterioration of their surface reflectivity as a result of erosion by charge-exchange neutrals and re-deposition of material eroded from the plas ...
In this paper, two simplified models of edge localized mode (ELM) power exhaust are developed, one based on the kinetic and the other on the fluid treatment of parallel losses. These models are found to capture many (though not all) of the salient features ...
Numerical simulations of electron temperature gradient (ETG) turbulence are presented that characterize the ETG fluctuation spectrum, establish limits to the validity of the adiabatic ion model often employed in studying ETG turbulence, and support the ten ...
This report summarizes Type I edge localized mode (ELM) dynamics measurements from a number of tokamaks, including ASDEX-Upgrade, DIII-D, JET, JT-60U and MAST, with the goal of providing guidance and insight for the development of ELM simulation and modell ...
For the ITER project it is clear that steps have to be taken in order to avoid or mitigate type-I ELMs when operating in the standard H-mode scenario. Otherwise, divertor power loads induced by intrinsic ELMs will result in an intolerably short divertor li ...
