Deformation mechanism in nanocrystalline FCC metals studied by atomistic simulations
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Calculated strain distributions in flexible pavement were studied by comparison with measurements made on full-scale structures. The calculated results were obtained by elastic and viscoelastic modellings of these structures. As no stress measurements were ...
A superposition technique is introduced that allows for the application of discrete dislocation (DD) plasticity to a wide range of thermomechanical problems with reduced computational effort. Problems involving regions of differing elastic and/or plastic b ...
A computational method (CADD) is presented whereby a continuum region containing dislocation defects is coupled to a fully atomistic region. The model is related to previous hybrid models in which continuum finite elements are coupled to a fully atomistic ...
Room temperature investigations on the shear stress and deformation mechanisms of (Mg0.9Fe0.1)SiO3 perovskite are performed in situ up to 32 GPa using radial X-ray diffraction and the diamond anvil cell as a deformation apparatus. The uniaxial stress suppo ...
The deformation of copper with grain size less than 10 nm is investigated using a 2D continuum model incorporating atomistically-based constitutive relations. The local constitutive response of a series of symmetric and asymmetric tilt grain boundaries is ...
The three-point bending test by Kolsky-bar apparatus is a convenient technique to test the dynamic fracture properties of materials. This paper presents detailed three-dimensional finite element simulations of a silicon particle reinforced aluminum (SiCp/A ...
The soft tissue, called periodontal ligament (PDL), that connects the alveolar bone and the tooth root accounts to a large extent for the mobility, stress-distribution and, due to its viscoelastic properties, damping of the bone-tooth complex. The accurate ...
Slip markings produced on the surfaces of Ni3(Al, Ta) single crystals, plastically deformed at various temperatures in the flow stress anomaly domain, were examined by atomic force microscopy (AFM). A dominant feature is that for all investigated temperatu ...
Hot tearing, a severe defect occurring during solidification, is the conjunction of tensile stresses which are transmitted to the mushy zone by the coherent solid underneath and of an insufficient liquid feeding to compensate for the volumetric change. In ...
Diffusion of vacancies and impurities in metals is important in many processes occurring in structural materials. This diffusion often takes place in the presence of spatially rapidly varying stresses. Diffusion under stress is frequently modelled by local ...
