Seismic design of torsionally eccentric buildings with U-shaped RC walls
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Reinforced concrete (RC) flat slabs supported by slender columns are often used as gravity load resisting system for buildings in regions of moderate and high seismicity. Such buildings are typically braced by RC walls, which carry the largest portion of t ...
In many countries of moderate to high seismicity, reinforced concrete (RC) core walls are used as lateral bracing systems in mid- to high-rise buildings where they typically accommodate lift shafts or stair cases. Unlike planar walls which provide horizont ...
The seismic design provisions and stability requirements for steel columns used at the first storey of MRFs as specified is Canadian steel design standard (CSA S16), U.S. design provisions for steel buildings (AISC 341 and AISC 360), the New Zealand steel ...
The reliable estimation of the seismic performance of structures requires quantifying the aleatory and epistemic uncertainties of the system parameters. This is efficiently achieved for a case study of a four-story steel moment-resisting frame through seve ...
A series of seismic tests were conducted on a 1½-bay by 1½-story special steel moment-resisting frame subassembly from the onset of damage through incipient collapse. These tests were conducted using hybrid simulation with substructuring as a mean to demon ...
Displacement-based seismic design and assessment procedures require as key input parameter estimates of displacement capacities of the critical elements. The displacement capacities of unreinforced masonry (URM) walls are typically determined by means of q ...
This paper presents the results of a series of shake-table tests on a half-scale, four-storey building with reinforced concrete (RC) and unreinforced masonry (URM) walls. Due to the lack of reference tests, the seismic behaviour of such mixed structures is ...
The recent re-assessment of the seismic hazard in Europe led for many regions of low to moderate seismicity to an increase in the seismic demand. As a consequence, several modern unreinforced masonry (URM) buildings, constructed with reinforced concrete (R ...
In many countries reinforced concrete (RC) flat slabs supported on columns is one of the most commonly used structural systems for office and industrial buildings. To increase the lateral stiffness and strength of the structure, RC walls are typically adde ...
Examining the results of a large set of quasi-static cyclic tests on unreinforced masonry (URM) walls showed that the drift capacity of URM walls reduces with increasing wall size. Such a size effect is of concern since most wall tests were carried out on ...
