Hydrodynamics of a Pump-Turbine under Off-Design Operating Conditions in Generating Mode
Related publications (51)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Static axial induction control and tilt control are two strategies that have the potential to increase power production in wind farms, mitigating wake effects and increasing the available power for downstream turbines. In this study, wind tunnel experiment ...
Basel2024
According to the International Energy Agency, the global net-zero emissions objective requires the installed wind power capacity to increase 11-fold between 2020 and 2050. The scientific community has recently voiced concerns about the logistic feasibility ...
Pressurised water supply systems are infrastructures that offer a potential for energy recovery in locations where these systems operate with an excessive pressure. The integration of micro hydropower plants for energy recovery is a challenge, as these sys ...
EPFL2018
, , ,
Hydropower units may be required to operate in condenser mode to supply reactive power. In this operating mode, the water level in the turbine or pump-turbine is decreased below the runner by closing the guide vanes and injecting pressurized air. While ope ...
2018
,
An optimized three-bladed horizontal-axis miniature wind turbine, called WiRE-01, with the rotor diameter of 15 cm is designed and fully characterized in Part I of this study. In the current part of the study, we investigate the interaction of the turbine ...
A micro steam turbine with a tip diameter of 15 mm was designed and experimentally characterized. At the nominal mass flow rate and total-to-total pressure ratio of 2.3 kg/h and 2, respectively, the turbine yields a power of 34 W and a total-to-static isen ...
Pumps running as turbines are suitable hydraulic machines for micro hydropower applications. The selection of the proper pumps to install in a given site still remains a major challenge, as pump manufacturers do not provide the characteristic curves data i ...
2019
, , ,
The rotating air-water ring, featuring a bubbly flow, in the vaneless gap of a reduced scale physical model of a pump-turbine operating in dewatered condition is investigated. High speed visualizations are performed together with pressure fluctuation measu ...
2018
, ,
While small scale ORCs are currently dominated by volumetric expanders, the use of turbomachines is reconsidered due to their high efficiency and power density. Yet, suitable performance maps, which ensure an accurate starting point for the turbine design, ...
Hydraulic turbines and pump-turbines are often required to operate in particular conditions at which they consume active power. To keep the power consumption at a minimum, it is necessary to dewater the runner to reduce the mechanical torque. One of these ...