Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The reduced activation tempered martensitic steel Eurofer97 is a reference steel for a structural applica-tions in fusion reactors. The first-wall and blanket materials will be subjected to high thermal and neutron fluxes and will experience very complex, ...
The mechanical strength of metals depends on their resistance against various microscopic
deformation processes. In ductile metals, the most important process is shearing of the crystal
lattice by dislocations. One of the fundamental aspects of dislocation ...
Continuous-fiber ceramic matrix composites (CMCs) are of interest as hot-section components in gas turbine engines due to their refractoriness and low density relative to metallic alloys. In service, CMCs will be subjected to spatially inhomogeneous temper ...
This thesis contributes to the field of biomechanics of vascular wall. The focus is particularly on the microstructure of vascular elastin and collagen constituents and their contribution to the macroscopic mechanical behavior of the wall. The analysis is ...
Objective: To perform a mechanical characterization of a self-setting calcium phosphate cement in function of the immersion time in Ringer solution. Materials and methods: Specimens of self-setting calcium phosphate cement were prepared from pure alpha-TCP ...
Nanocrystalline (NC) metals have attracted widespread interest in materials science due to their high strength compared to coarse-grained counterparts. It is well know that during uniaxial deformation, the stress-strain behaviour exhibits an extraordinary ...
We derive a three-dimensional constitutive theory accounting for length-scale dependent internal residual stresses in crystalline materials that develop due to a non-homogeneous spatial distribution of the excess dislocation (edge and screw) density. The s ...
This paper aims to analyse the anisotropic features of behaviour of Opalinus Clay using the theory of plastic multi-mechanisms. The results of triaxial tests conducted with different load levels and directions showed that the mechanical behaviour of this s ...
An innovative higher-order beam theory, capable of accurately taking into account flexural–shear–torsional interaction, is originally combined with a force-based formulation to derive the corresponding finite element. The selected set of higher-order defor ...
In this study, a novel retrofitting system is developed to strengthen existing metallic I-girders using prestressed unbonded carbon fiber reinforced polymer (CFRP) plates. The system relies on a pair of mechanical clamps. Each clamp holds two CFRP plates ( ...