Optimization of the chemical composition and manufacturing route for ODS RAF steels for fusion reactor application
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
In liquid metal spallation targets such as the MEGAPIE (the megawatt pilot experiment) target and the future ADS (accelerator driven system) spallation targets, which utilize liquid lead-bismuth eutectic (LBE) as the target material, liquid metal embrittle ...
Two types of oxide dispersion strengthened (ODS) ferritic steels, with the composition of Fe-14Cr-2W-0.3Ti-0.3Y(2)O(3) (in weight percent), have been produced by mechanically alloying elemental powders of Fe, Cr, W, and Ti with Y2O3 particles either in arg ...
This paper describes the microstructure, tensile properties and Charpy impact resistance of a reduced activation oxide dispersion strengthened ferritic steel Fe-14Cr-2W-0.3Ti-0.3Y(2)O(3) produced by mechanical alloying of a pre-alloyed, gas atomised steel ...
The fracture properties of the tempered martensitic steel Eurofer97, which is among the main candidates for fusion power plant structural applications, were studied with two sizes of pre-cracked compact specimens (0.35T C(T) and 0.87T C(T)). The fracture t ...
Six oxide dispersion strengthened (ODS) ferritic steels, with the composition of Fe-(12-14)Cr-2W-(0.1-0.3-0.5)Ti-0.3Y(2)O(3) (wt.%), have been prepared by mechanically alloying elemental powders of Fe, Cr, W, and Ti with Y2O3 nano-particles followed by hot ...
Trans Tech Publications Ltd, Laublsrutistr 24, Ch-8717 Stafa-Zurich, Switzerland2009
Copper and copper alloys typically experience a sharp loss in ductility at intermediate temperature, induced by grain boundary damage and fracture processes. The susceptibility of the material to intermediate temperature embrittlement is, as a result, stro ...
Significant progress has been achieved in the international research effort on reduced activation ferritic/martensitic steels for fusion structural applications. Because this class of steels is the leading structural material for test blankets in ITER and ...
The effects of the post-yield behaviour on the shape of small ball punch test (SBPT) curves were investigated with finite element simulations from which the load-deflection curves were extracted. We have shown the general yield load defined on the ball pun ...
Mechanical-loss measurements were performed in three grades of martensitic high-carbon tool steels. These steels were treated under carburizing gas before quenching, in order to vary the concentration of interstitial carbon in the martensite, as assessed b ...
In this work we have studied brittle fracture in high-chromium reduced activation tempered martensitic steels foreseen as structural materials for thermonuclear fusion reactors. Developing the adequate materials that can withstand the severe irradiation co ...
