Experimental comparisons for bottom reflooding in tight LWHCR and standard LWR geometries
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Nuclear reactors are inherently stochastic systems, in which neutronic and thermal-hydraulic parameters fluctuate continuously even during steady-state conditions. In addition, structural components vibrate due to the coolant hydraulic forces. This stochas ...
The operation of a reactor on an open but self-sustainable cycle without actinide separation is known as breed-and-burn. It has mostly been envisioned for use in solid-fueled fast-spectrum reactors such as sodium-cooled fast reactors. In this paper the app ...
We demonstrate biogas upgrading towards full CO2 conversion in mild conditions in a three-step reactor system using Ru- and Ni-based catalysts. In each of the three reactor stages, the temperature is carefully controlled, thus optimizing the reaction therm ...
For an energy source to qualify as sustainable, it must maximize the efficiency with which it uses natural resources while minimizing the amounts of waste it produces. Currently deployed nuclear power plants however use a very limited amount of the energy ...
DYN3D is a well-established Light Water Reactor (LWR) simulation tool and is being extended for safety analyses of Sodium cooled Fast Reactors (SFRs) at the Helmholtz-Zentrum Dresden-Rossendorf. This thesis focuses on the first stage of the development pro ...
Nuclear fusion presents a promising clean energy source to mitigate future energy crises, with magnetic confinement fusion well-positioned to provide a baseload scenario to power future reactors. The unmitigated power exhaust of such reactors threatens its ...
A multi-physics solver for nuclear reactor analysis, named GeN-Foam (Generalized Nuclear Foam), has been developed by the Laboratory for Reactor Physics and System Behavior at the EPFL and at the Paul Scherrer Institut (Switzerland). The developed solver c ...
In this study, a hypothetical fast spectrum Liquid Fuel Molten Salt Reactor (LFMSR) core is modeled using the multiphysics C++ code GeN-Foam (General Nuclear Foam). GeN-Foam is based on OpenFOAM, a C++ opensource library for solution of continuum mechanics ...
Recent LOCA tests with high burnup fuel at the OECD Halden Reactor Project and at Studsvik demonstrated the susceptibility of the fuel to fragment to small pieces, to relocate and possibly cause a hot-spot effect and to be dispersed in the event of claddin ...
A comprehensive program of integral experiments, largely based on the measurement of reaction rate distributions, was carried out recently in the PROTEUS zero-power research reactor at the Paul Scherrer Institute in Switzerland, employing a fuel lattice re ...
