Effects of strain and composition on the lattice parameters and applicability of Vegard's rule in Al-rich Al1-xInxN films grown on sapphire
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
This work defines an incompressible, hyperelastic theory of anisotropic soft materials at finite strains, which is tested by application to the experimental response of fiber-reinforced rubber materials. The experimental characterization is performed using ...
In this study, we produced four composite materials with Al-based matrix reinforced by Al-Cu-Fe particles initially of the quasicrystalline (QC) phase. The processing route was a gas-pressure infiltration of QC particle preforms by molten commercial Al and ...
The second-order correlation function of the polariton condensate is calculated within two different approaches. Both approaches qualitatively reproduce the deviations from the full coherence of the second-order correlation function that have been observed ...
Aeroelastic tailoring requires structural compliance and thus often conflicts with stiffness requirements to carry prescribed aerodynamic loads. Recently however, the application of cellular structural concepts has suggested the potential to achieve compli ...
Nanocrystalline metals have been an area of great interest in recent years due to their enhanced characteristics. One of the most striking is implied by the Hall-Petch relation: with decreasing grain size the material becomes stronger. This promise is fulf ...
The subject of this thesis is the growth and analysis of high temperature superconductor (HTSC) films and the study of their electronic structure and properties. In particular, the effect of epitaxial strain is investigated, predominantly by means of in-si ...
Harmonic tension–compression tests at 0.1, 0.5 and 1 Hz on hydrated bovine periodontal ligament (PDL) were numerically simulated. The process was modeled by finite elements (FE) within the framework of poromechanics, with the objective of isolating the con ...
A new model considering fixed and interlocked cracks for the analysis of reinforced concrete (RC) cracked membrane elements is presented. The model can be regarded as an extension of the cracked membrane model proposed by Kaufmann and Marti. Its value lies ...
Strain engineering is used to maintain Moore's Law in scaled CMOS devices and as a technology booster for More-than-Moore devices in the nanoelectronics era. Strain is crucial because of its ability to increase electron and hole mobilities in Si. However, ...
The effect of high-temperature annealing on stress in AlxGa1-xN in different ambients and at different temperatures was studied using ultraviolet micro-Raman spectroscopy. Low (x=0.08) and high (x=0.31 and x=0.34) composition AlGaN, grown by metalorganic c ...
