The role of calcium and magnesium in the concrete tubes of the sandcastle worm
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Cement production accounts for approximately 8% of man-made CO2 emissions. Lowering these CO2 emissions is currently one of the most important and urgent research topics within the cement community. To reduce these emissions, the Portland cement (PC) is pa ...
Limestone calcined clay cements (LC3) are blended cements that combine clinker, limestone, calcined clay and gypsum. The availability of the materials required to produce LC3 and the good performance that it achieves, makes LC3 suitable as a sustainable re ...
In 1970, Furth and Yoshikawa (1970 Phys. Fluids 13 2593-6) introduced the scalings of adiabatic plasma compression. Basically, if the shape of the external plasma boundary and the aspect ratio are preserved during the compression, then the density, kinetic ...
The occurrence of cracking due to alkali silica reaction (ASR) affects the service life of concrete structures. The dissolution of silica-containing minerals within aggregates causes the formation of ASR products, which fill macroscopic cracks and cause th ...
The reduction of green-house gas emissions is one of the global challenges that our society is facing and the production of cement plays a major role because concrete is the most used material worldwide. For every 1000 kg of cement produced, 900 kg of CO2, ...
Calcium silicate hydrate (C-S-H) is the main hydration product in Portland and blended cements, and greatly affects durability and mechanical properties of the hydrated cement. In the presence of Al-rich supplementary cementitious materials (SCMs), C-(A-)S ...
The dissolution kinetics of silica-containing minerals in aggregates influences strongly the process of ASR in concrete. In this paper, the effect of different ions on the dissolution rates of SiO2 (amorphous and quartz) and feldspars at high pH values was ...
The high solution to solid ratio normally used for the measurement of chloride binding isotherms, leads to a leaching of ions and a decrease of pH. To make binding test more representative of on-site conditions, we investigated the influence of the increas ...
The mechanisms of external sulfate attack on cement mortars containing nano silica have been studied under full immersion conditions after 3 years. The sulfate degradation processes were compared between sodium sulfate and magnesium sulfate solutions with ...
This paper presents a comparison of methods to quantify the chloride binding capacity for cementitious materials composed of Ordinary Portland Cement (OPC) and Limestone (LS, 0 to 55% replacement). Physical and chemical chloride bindings were investigated ...