System Fidelity Factor: a new method for comparing UWB antennas

The main purpose of the System Fidelity Factor (SFF) is to incorporate frequency and time domain characteristics of an antenna system into a comparison method for ultrawideband (UWB) antennas. The SFF is an interesting tool because both simulations and measurements can be done in a simple and straight-forward manner. Simulations of a single antenna are combined into a two-antennas system analysis by means of a simple post-processing, where the transfer function of the transmitting and receiving antennas are calculated. Measurements of the SFF are done using a two port Vector Network Analyzer (VNA). The polar representation of the SFF allows an equitable comparison between antennas. The procedure to derive the SFF is described in detail in the paper. Two examples are given where the UWB performance of three antenna systems are compared. In the first example antenna systems of two identical monopoles are studied. In the second example the transmitting antenna is a Vivaldi and the receiving antenna a monopole.

Impact of substrate permittivity on the performance of UWB monopoles

Gabriela Quintero Diaz De Leon, Anja Skrivervik Favre, Jean-François Zürcher

The effect of substrate permittivity on UWB antenna radiation is studied. Microstrip and CPW-fed UWB monopoles are designed using substrates with different dielectric constants. The radiation patterns are measured. The transfer function of a two identical antenna system is calculated and later the received pulse is compared with the radiated pulse. Distortion produced by the antennas in every azimuth angle of radiation is quantified with the fidelity factor. The different radiation characteristics of each antenna are discussed. A conclusion is given about the feasibility to make UWB antennas using high permittivity substrates.

Ieee Service Center, 445 Hoes Lane, Po Box 1331, Piscataway, Nj 08855-1331 Usa2009

Analysis and Design of Ultra-Wideband Antennas in the Spectral and Temporal Domains

Gabriela Quintero Diaz De Leon

Formal research on Ultra-wideband (UWB) technology started in the U.S. in 2002; where its definition was formulated and the frequency allocation in that country established. However, the first ultra-wideband transmission was done during the confirmation of Maxwell's equations by Heinrich Hertz in 1886, the first ever reported radio transmission. Sparks or very short pulses were sent and received at a distance away from its source. UWB antennas have existed since those times, but technology has been mostly focused on the transmission of continuous wave narrowband signals. The largest problematic encountered in today's UWB antennas is that characterization methods were, since the beginning, meant to describe narrowband antennas. The frequency characteristics of these antennas are constant over their operational bandwidth, hence they can be fully characterized in the frequency domain. UWB antennas, on the other hand, are meant to transmit pulsed signals. Analyzing them only in the frequency domain is not enough to fully evaluate their performance, as pulse distortion is an important parameter that should be controlled. An extended literature review is included in the first part of this thesis, where the available UWB antenna characterization methods are evaluated. Many limitations were encountered, showing that the available techniques do not analyze simultaneously the most important parameters of an UWB antenna. A new characterization method is proposed: the System Fidelity Factor (SFF). Its main purpose is to incorporate frequency, time and space characteristics of a two-antennas system to compare UWB antennas in an efficient way. This is achieved with the correlation between the received and the input pulses, quantifying the distortion produced by the system. The SFF is an interesting tool because both simulations and measurements can be done in a simple and straight-forward manner, using tools that are commonly available in any antenna lab. Any combination of antennas can be analyzed and the free-space channel can be easily replaced with any other environment. Several UWB antennas were designed and used to prove the efficiency of the SFF. A good agreement between the proposed simulation techniques and the measurements was achieved. The antennas are novel designs specially developed for UWB applications under the American or European regulations. The last part of the thesis presents these antennas and analyzes them using the SFF to compare their performance.

EPFL2010

Analysis and Design of Ultra-Wideband Antennas in the Spectral and Temporal Domains

Gabriela Quintero Diaz De Leon

EPFL2010