Two-Phase Modeling of Hot Tearing in Aluminum Alloys: Applications of a Semicoupled Method
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
This paper presents numerical simulations of annular laminar film condensation heat transfer in micro-channels of different internal shapes. The model, which is based on a finite volume formulation of the Navier-Stokes and energy equations for the liquid p ...
American Soc Mechanical Engineers, Three Park Avenue, New York, Ny 10016-5990 Usa2009
Hot tearing is one of the most severe defects observed in castings, e.g. in billets or sheet ingots of aluminum alloys produced by DC casting. It is due to both tensile strains and a lack of interdendritic feeding in the mushy zone. In order to predict thi ...
In jewelry manufacturing, joining dissimilar materials is usually achieved by soldering or brazing, but these techniques have several disadvantages as compared for example with laser welding. In this last case, however, it is necessary to have a thorough u ...
Minerals, Metals & Materials Soc, 184 Thorn Hill Rd, Warrendale, Pa 15086-7514 Usa2009
We have micromachined and tested the first paraffinPDMS composite thermal microactuator having multi shot large vertical displacement capabilities ( 160 um for 1 mm diameter device). A solid to liquid phase change of trapped paraffin into the PDMS is used ...
While studies of solidification microstructures have focused mainly on the tips of the dendrites, the last stage solidification is equally important from the point of view of defect formation (porosity, hot tearing), mechanical strength build-up and precip ...
We show that the liquid-to-crystal quantum phase transition in the Rokhsar-Kivelson dimer model on the two-dimensional triangular lattice occurs as a condensation of vortexlike excitations called "visons." This conclusion is drawn from numerical studies of ...
The study considers the prediction of the entrained liquid fraction in adiabatic gas-liquid annular two-phase flow in vertical pipes. Nine empirical correlations have been tested against an experimental data bank drawn together in this study containing 150 ...
This paper deals with the identification of reaction and mass-transfer rates from concentrations measured in gas-liquid reaction systems. It is assumed that the reactions take place in the liquid bulk only. The identification proceeds in two steps: (i) est ...
Anodic aluminium oxide (AAO) containing arrays of aligned cylindrical nanopores infil-trated with polymers is a well defined model system for the study of hypersound propagation in polymer nanocomposites. Hypersonic phononic properties of AAO/polymer nanoc ...
This paper presents a method for wheel-ground contact angle measurement and a traction control strategy minimizing slip in rough terrain. The slip minimization algorithm has been tested and compared with a standard speed control in simulation, which allows ...
