About Initial Solidification In Continuous Casting Of Steel
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The martensitic phase transformation in steel is one of the most famous solid state transformation because of its contribution in the development of the modern industry. This transformation from a face-centered cubic (FCC) high temperature phase, called th ...
The deformation-induced martensitic transformation observed in specific materials can enhance their mechanical properties or result in functional properties. For example, the transformation induced plasticity (TRIP) effect results in a good combination of ...
Steel reinforcing bars in concrete are protected from corrosion by a thin oxide film that is created on the steel surface in the highly alkaline environment of the concrete. Corrosion process begins once this oxide film is destroyed, for example, by chlori ...
In this paper research work on welded butt weld connections between hot-rolled seamless tubes and steel castings are presented. Comparison is made between different weld preparations for the butt welds including different steel grades, repair methods, the ...
Ferritic /martensitic (FM) steels are among the most important materials in various nuclear applications. As radiation-induced segregation (RIS) is one of the major factors for embrittlement of nuclear materials, thereofre it is essential to study the RIS ...
This chapter begins with a short overview of the historical development of the ferritic/martensitic steels for nuclear energy systems, followed by a section that outlines the numerous nuclear applications where this type of steels are currently used or for ...
The austenite/martensite (fcc/bcc) interface is prevalent across many new classes of high-strength steels, and yet both its fundamental structure and its mechanism of motion remain uncertain in spite of decades of research. Here, atomistic simulations are ...
High-head steel lined pressure tunnels and shafts may be considered as critical infrastructures especially when rock overburden is small. In the case of lining failure, catastrophic damages can occur when a large amount of water can reach the steep valley ...
The mechanical properties and corrosion resistance of 316 L stainless steel fabricated using the Laser Engineered Net Shaping (LENS) technique have been studied. The crack-free, full density samples made using SS316L alloy powder and the LENS technique are ...
Fine twinned microstructures with {225}γ habit planes are commonly observed in martensitic steels. The present study shows that an equibalanced combination of twin-related variants associated to the Kurdjumov-Sachs orientation relationship is equivalent to ...