The influence of 0-0.1 wt.% Ni on the microstructure and fluidity length of Sn-0.7Cu-xNi
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
This thesis is an exploration of deformation and fracture properties of a novel two-phase α2 + γ Ti46Al8Ta (at.%) alloy featuring a "convoluted" microstructure, produced by partners within a European Union project named IMPRESS. Properties of this alloy ar ...
Copper and copper alloys typically experience a sharp loss in ductility at intermediate temperature, induced by grain boundary damage and fracture processes. The susceptibility of the material to intermediate temperature embrittlement is, as a result, stro ...
Au-Ge-based alloys are potential substitutes for Pb-rich solders currently used for high-temperature applications. In the present work, the wetting behavior of two Au-Ge-X (X = Sb, Sn) ternary alloys, i.e., Au-15Ge-17Sb and Au-13.7 Ge-15.3Sn (at.%), in con ...
Ce rapport décrit les tests effectués sur des capteurs CentoNewton-B en cours de productions pilotes, dans le but d’utiliser à l’avenir de la brasure sans plomb. S'il est possible d'utiliser une composition conductrice argent peu allié (ESL 9562G) pour les ...
The present study investigated the role of alloy microstructure and surface roughness on wear and friction behavior of leaded and unleaded tin bronzes. Ball-on-disk experiments were carried out under dry conditions with steel balls sliding against bronze d ...
Cu-Ni-Sn alloys with Pb additions exhibit high mechanical strength at room temperature coupled with good machinability but experience a significant ductility loss above the melting point of lead. We explore here the influence of minor additions of Al, Mn, ...
The formation of feathery grains during semi-continuous casting of Al-alloys [1, 2] is an interesting problem from both practical and theoretical points of view. These structures are formed by a lamellar sequence of twinned and untwinned regions separated ...
The wetting of angular alumina particle preforms by Cu-Sn alloys is investigated by means of pressure infiltration experiments conducted at 1150 A degrees C, using a system enabling dynamic and precise measurements of the metal volume injected into the pre ...
Five ternary Sn-0.7Cu-xNi alloys with nickel contents in the range 0-1000 ppm have been directionally solidified at different growth rates. The competition between primary tetragonal Sn cells/dendrites, eutectic and primary Cu6Sn5 is interpreted with phase ...
Porosity is one of the major defects in castings because it reduces the mechanical properties of a cast piece [1]. Porosity formation results from the effect of two concomitant mechanisms, namely solidification shrinkage and segregation/precipitation of ga ...
