Simulation of Thermal stresses in anode-supported solid oxide fuel cell stacks
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
During their lifetime, glass panels are repetitively exposed to thermal stresses. These thermal stresses result from temperature differences within the panel, which most notably cause the edges of the panels to be stressed in tension. When these thermal st ...
Thermally-induced residual stresses, generated during the industrial Direct Chill casting process of aluminum alloys, can cause both significant safety concerns as well as the formation of defects during down-stream processing. Although these thermally ind ...
Under certain exposure conditions, femtosecond lasers create nanogratings in the bulk of fused silica for which the orientation is governed by the laser polarization. Such nanostructure induces stress that affects optical and chemical properties of the mat ...
A model based on the Euler-Bernoulli theory is used to assess the sensitivity of residual stresses in solid oxide fuel cells to the mechanical properties and geometry of the constituents. It considers different cell configurations, characterised by the pre ...
Stress relief treatment before machining and sawing aluminium direct chill cast products is required to avoid uncontrolled distortion, crack formation and significant safety concerns due to the presence of thermally induced residual stresses created during ...
Thin circular piezoelectric energy harvester diaphragms undergoing large deflection in a harsh liquid environment are investigated in this paper. A material set combining AlN as transducer, SiC as electronics, Mo as wiring and Si as holder is considered. A ...
The present paper focuses on the development of an inverse procedure able to infer the hydrodynamic pressure distribution acting on the material surface and responsible for the creation of the cavitation pit based on the stress in a cavitation pit and its ...
Dislocation densities have been measured in Ni3Al(Hf) single crystals after deformation at various temperatures and strains. In addition, effective and athermal stresses have been determined by strain dip tests. A model is proposed for the strength anomaly ...
In the current trend toward thicker aluminium plates, a major concern is the stress build-up during quenching which causes distortions during machining. Indeed, cooling rates are not high enough, especially at the core of such thick plates, to prevent any ...
Cracking is a most unwanted development in soil structures undergoing periodic drying. Desiccation cracking arises in the apparent absence of external forces. Hence, either an internal, self equilibrated stress pattern resulting from kinematic incompatibil ...
