Hydration of C3A with Calcium Sulfate Alone and in the Presence of Calcium Silicate
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
An important mode of hydration of Ordinary Portland cement (OPC) is via the formation of a shell of hydration products around cement grains. It has been shown so far that shells form not only in OPC but also around C3A grains in a mixture of alite, C3A and ...
Placing concrete requires much more water than the cement needs for its hydration. This results in an important porosity in the hardened concrete, which accentuates the degradation of this material. By adding small amounts of polymeric admixtures, called s ...
Impure tricalcium silicate (Alite, C3S) is the most important and abundant phase of Portland cement. It reacts quickly with water to give calcium hydroxide (CH) and calcium silicate hydrate (C-S-H) which is the most important phase for strength development ...
The applications of systems based on Portland Cement (PC), Calcium Aluminate Cement (CAC) and Calcium Sulphate (C$) are usually limited to indoor uses in the field of Building Chemistry because no durability data exist on the outdoor uses. These ternary bi ...
The global objective of this thesis was to understand how the starting components of brushite cements influence the cement properties relevant for its use in vertebroplasty. Therefore, this work focussed on the following cement properties : mechanical stre ...
A new modelling framework, called μic, has been developed to enable simulations of complex particulate growths, in particular the microstructural evolution of hydrating cement paste. μic has been developed using the vector approach, which preserves the mul ...
The formation of thaumasite was investigated with the progressive equilibrium approach (PEA). This approach experimentally simulates the conditions of various levels of sulfate addition in hardened cement pastes. The influence of limestone, time, C(3)A con ...
Self-levelling flooring compounds (SLC) are applied in thin layers (less than 1cm) to level floors before further finishing cover such as parquet or plastic cover. They are composed of a ternary binder system based on Portland cement (PC), calcium aluminat ...
Cement pastes aged from 1 to 60 days were studied using synchrotron microtomography on the MS-X04SA beam line at the Swiss Light Source. This allowed three dimensional images to be obtained with a resolution approaching that of backscattered electron image ...
The influence of both early and late heat treatments on the microstructure and on the hydration products of Portland cement mortars has been investigated. The mortars were given either a 4-h or 28-day precure at 20 °C before heating at 90 °C for 12 h and w ...
