Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Magnesium (Mg) alloys have recently been put under the spotlight for their specific strength, the highest among structural metals. Although the mechanical behaviour of Mg alloys at quasi-static strain rates has been extensively modelled in the recent years ...
Temperature tuning of spectral broadening induced by a nonlinear grating is experimentally demonstrated. The bandwidth is observed to decrease as temperature increases, corresponding to a red-shift in the high dispersion region of the Bragg grating. ...
A microscopic three-point bending test that measures the strength of faceted particles of high aspect ratio is developed and used to probe individual coarsened plate-like silicon particles extracted from the eutectic Al-12.6%Si alloy. Focused ion beam mill ...
An investigation was conducted to systematically explore the relationships among microstructure evolution, continuous cooling transformation kinetics, and mechanical properties development in a low-carbon reheated weld metal (0.052C-1.5Mn-0.3Si-0.7Cr-0.8Mo ...
ELSEVIER SCIENCE SA2019
, ,
The physical and mechanical properties of a cold-curing structural epoxy adhesive, exposed to a representative wet bridge environment, were investigated. A significant decrease of the glass transition temperature, tensile E-modulus and tensile strength was ...
The physical and mechanical properties of a cold-curing structural epoxy adhesive, exposed to a wet bridge environment, were investigated. A significant decrease of the glass transition temperature, tensile E-modulus and tensile strength was observed which ...
This paper focuses on the importance of taking into account scattering of material parameters (zinc in this example) to perform sheet metal forming simulations. The approach described in this paper is efficiently pragmatic to consider as inputs the materia ...
Ferritic-martensitic Oxide Dispersion Strengthened (ODS) steels are potential materials for fuel pin cladding in Sodium Fast Reactor (SFR) and their optimisation is essential for future industrial applications. In this paper, a feasibility study concerning ...
Edp Sciences S A2016
,
A FeCrCuMnNi high-entropy alloy was produced using vacuum induction melting, starting from high-purity raw materials. The microstructure and mechanical properties of the as-cast FeCrCuMnNi alloy were studied, considering x-ray diffraction (XRD), scanning e ...
SPRINGER2019
,
As cast FeCrCuMnNi high entropy alloys were heat treated at different temperatures and times. Structure and mechanical properties of the heat treated alloy were studied using X-Ray diffraction, tensile test, hardness test and scanning electron microscopy. ...
