Effects of thermal loading history on structural adhesive modulus across glass transition
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
A PCM dephaser and storage module based on a melting/freezing model was built and implemented into the Dymola-Modelica software. This software offers thermal libraries with standard components as tubes, pumps, heat exchangers, etc. Main simulation results ...
In the present study, the sintering behavior of a commercial nano alumina powder with an initial particle size of 100 nm was investigated. The shrinkage response of the powder formed by pressure filtration (PF) during non-isothermal sintering was measured ...
Temperature dependence of physical and mechanical properties is considered in most thermal and mechanical response models for composite materials. Based on thermogravimetry analysis, differential scanning calorimetry, and dynamic mechanical analysis conduc ...
A decomposition model for resin in glass fiber-reinforced polymer composites (GFRP) under elevated and high temperature was derived from chemical kinetics. Kinetic parameters were determined by four different methods using thermal gravimetric data at diffe ...
Surface vanadia species formed on vanadia/titania catalysts consisting of 0.2-2.6 monolayers (ML) of VOx have been characterized by FT-Raman spectroscopy under controlled atm., temp.-programmed redn. in hydrogen (TPR), and soly. in dild. HNO3. Three types ...
Master sintering curve (MSC) was used as a practical approach to analyse the sintering behavior of an ultrafine alumina powder. Non-isothermal sintering was carried out at three heating rates. The concept of the MSC has been used to investigate the effect ...
Fabrication of sensors and micro-fluidic structures from low temperature co- fired ceramic (LTCC) sheets is a growing interest in the micro-packaging community. Such devices usually have inner cavities, whose production is quite complicated. The most elega ...
Extending the idea of exergy to practitioners and policy makers is still a major challenge. Recently the "Canton of Geneva" in Switzerland introduced a new law governing the procedures of attribution of building permits for new or retrofitted city areas. A ...
A new type of air-water heat pump has been developed with the aim to cover an extended application range in high temperature residential heating (for retrofitting existing oil or gas boilers in hydronic heating systems). The base heat output is about 10 kW ...
The densification and grain growth of bodies made from a commercial ultrafine alumina powder was investigated. The primary powder was initially subjected to dry (uniaxial cold pressing) and wet shaping (slip casting), followed by conventional (CS)-, two st ...
