μic: A new platform for modelling the hydration of cements
Related publications (33)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
This work studies the effect on Embodied Energy (EE) of concrete when Ordinary Portland Cement (OPC) is partially substituted with natural Pozzolanic Volcanic Ash (VA) at the material and the building scale. The work aims to demonstrate potential improveme ...
This article presents a new model for the main hydration peaks of tricalcium silicate and alite on the assumption that C-S-H nucleates and grows as needles. The model relies only on directly observable quantities and reproduces the transition from the acce ...
In this paper, the replacement of high cost silica fume with calcined clay was investigated in UHPFRC mixes. The impact of two grades of calcined clay on the hydration and microstructural development of UHPFRC matrices was investigated, where 54% of the ce ...
Sodium gluconate has been shown to compensate the impact of alkalis on the long term strength development of cement pastes. This work studies the impact of sodium gluconate combined with Na2SO4 on the microstructural development of white cement-slag system ...
The combination of calcined kaolinitic clays and limestone in Limestone Calcined Clay Cement (LC3) is a promising approach to reduce the cost and the CO2 emissions of cement production by reducing the clinker content of cement. This thesis investigates the ...
The replacement of clinker with supplementary cementitious materials (SCMs) is the most interesting solution to reduce the CO2 emissions from cement production. The abundant availability of clays, which have a sufficient amount of kaolinite content in Thai ...
Cement hydrates and their chemically bound water content are sensitive to changes in relative humidity (RH) and temperature. This may cause specific solid volume changes affecting dimensional properties of hydrated cement paste such as shrinkage, swelling ...
Supplementary cementitious materials (SCM) lower the environmental impact of cement and concrete but react more slowly than Portland cement, which therefore limits the levels of substitution possible as reasonable early strengths are necessary. One of the ...
Supplementary cementitious materials (SCMs) are currently used to replace part of the clinker to reduce the environmental impact of cement and to favor the use of local materials. Two representative SCM have been used in this work: slag and fly ash. Each o ...
This dissertation originates from an investigation about the arising of the modern, German building expertise involving the use of concrete, which develops during the first three quarter of the 19th century against the backdrop of a general modernisation p ...