Position of defects with respect to domain walls in Fe[sup 3+]-doped Pb[Zr[sub 0.52]Ti[sub 0.48]]O[sub 3] piezoelectric ceramics
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Lead zirconate titanate (Pb(Zr1-xTix)O3 or PZT) ferroelectric ceramics have been widely used in transducers, actuators, and sensors, since they posses high dielectric and piezoelectric properties with a relatively high temperature of operation. Commerciall ...
Configuration of domain walls in undoped and Fe+3-doped lead zirconate titanate (PZT) ceramics at the morphotropic phase boundary has been investigated by the transmission electron microscopy. The distance between domain walls in undoped PZT is on the orde ...
Ferroelectric ceramic – polymer composites have a unique mix of electrical and mechanical properties. Piezoelectric and pyroelectric activity, a wide range of dielectric constants and high breakdown strength are combined with mechanical flexibility, formab ...
Large bipolar strain of up to 0.36% (peak-to-peak value) was measured in BiFeO3 ceramics at low frequency (0.1 Hz) and large amplitude (140 kV/cm) of the driving field. This strain is comparable to that achievable in highly efficient morphotropic phase bou ...
Pure and barium titanate (BT) powders doped with different lanthanum concentration were prepared by the polymeric precursor method (Pechini process) which was carried out as a three-stage process from organometallic complexes. Sintering of pressed powders ...
Radio frequency (RF) filters based on bulk acoustic wave resonances in piezoelectric thin films have become indispensable components in mobile communications. The currently used material, AlN, exhibits many excellent properties for this purpose. However, i ...
We have studied the polarization-electric-field hysteresis, the dielectric permittivity dispersion, the piezoelectric properties, the electric-field-induced strain, and the interrelations between these properties for bismuth ferrite (BiFeO3) ceramics. The ...
Stress induced ferroelastic switching may represent an efficient toughening mechanism in piezoelectric-ferroelectric ceramics. During the crack propagation, the high tensional stresses at the crack tip can be partially released by the reorientation of 90 d ...
Ieee Service Center, 445 Hoes Lane, Po Box 1331, Piscataway, Nj 08855-1331 Usa2010
Pb(Zr,Ti)O3 ceramics with homogenous, anisotropic porosity were manufactured and the influence of the anisotropic porosity on the dielectric and piezoelectric properties was studied. Image analysis allowed the quantification of the preferential orientation ...
The converse piezoelectric response of Pb(ZrxTi1−x)O3 ceramics is investigated as a function of material composition. The effects of the crystallographic phase and different dopants on piezoelectric nonlinearity are separately examined. For a linear depend ...
