Thermal Modeling and Management of Liquid-Cooled 3D Stacked Architectures
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Laboratory tests and inverse methods are used for the determination of the thermophysical properties of a CuCrZr alloy. The solidification path (temperature versus solid fraction curve) is determined using the Single Pan Thermal Analysis (SPTA) technique d ...
Fiber-reinforced synthetic polymers (FRP) are the building materials that may permit both the improvement of long-term building performance and the simplification of the construction process. Thanks to their high specific strength, low thermal conductivity ...
Based on defined temperature-dependent material properties, thermo-chemical and thermo-mechanical models were developed to predict the temperature progression and endurance of full-scale slab components exposed to ISO 834 fire conditions on their underside ...
This paper evaluates the influence of light levels (i.e., illuminance) on subjective thermal perception of people, distinguishing between thermal sensation and thermal evaluation. The goal is to investigate whether reported effects found by other studies i ...
This article presents the numerical analysis of temperature increase in the human head resulting from the power dissipation in a cortical implant. A 3–D head phantom with 22 tissue types and 0.2 mm x 0.2 mm x 2 mm resolution has been used in the simulation ...
Megawatt pilot target experiment (MEGAPIE) is an international project aimed at demonstrating the feasibility of a liquid lead–bismuth target for spallation facilities at a maximum beam power level of 1 MW. The thermal-hydraulics data measured during the M ...
In order to quantify the cooling conditions undergone by an ingot during direct-chill (DC) casting, thermocouples were immersed in the liquid pool and consequently entrapped in the solid, thus monitoring the temperature of the metal during its descent. Ass ...
This paper presents experimental studies on the fire behavior of fiber reinforced polymer (FRP) composite laminates and unloaded cellular FRP components with internal liquid cooling. The experiments were conducted to verify the objective of liquid cooling ...
We have performed thermal measurements and electrothermal simulations (finite element modelling) with the aim of optimizing the power consumption and the temperature distribution of micro-hotplates for gas-sensing applications. A silicon island was added u ...
