Tribocorrosion behavior of beta titanium alloys in physiological solutions containing synovial components
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
A phenomenological modelling approach has been developed for the description of die massive and lamellar microstructures which form in gamma-TiAl alloys at high and moderate cooling rates, respectively. The nucleation of both massive and lamellar gamma is ...
Minerals, Metals & Materials Soc, 184 Thorn Hill Rd, Warrendale, Pa 15086-7514 Usa2008
The microstructural characterization of two titanium alloys, Ti5Al2.5Sn and Ti6Al4V, was performed. These alloys were selected as representatives of the alpha and alpha + beta titanium families, to investigate their possible application as structural mater ...
Titanium alloys are considered as potential candidate structural materials for the first wall, the blanket and the magnetic coil structures of fusion reactors. Titanium alloys are interesting materials because of their high specific strength and low elasti ...
The microstructure of titanium alloys (Ti–1Al–1Mn, Ti–6Al–4V) nitrided under glow discharge was characterised using light microscopy, X-ray diffraction and analytical electron microscopy. The investigations revealed a complex multilayered microstructure pr ...
Bonding between polyolefins and steel is widely found in applications as diverse as steel wire/cord reinforced polymers, and automotive components where steel and thermoplastics are commonly used. As polyolefins are highly unreactive, because of their low ...
Microstructure and chemical composition of the hard Ni–P–Ti layer formed on the Ti–6Al–4V alloy after duplex surface treatment were investigated by light microscopy, X-ray diffraction, scanning electron microscopy and analytical/high resolution transmissio ...
We examine, in this work, the integration and high-strain response of piezoresistive thick-film resistors on titanium and titanium alloy, as compared with ferritic stainless steel and the standard alumina substrates. In general, titanium and its alloys are ...
X-ray absorption near-edge structure (XANES) spectroscopy is applied to Zr-based alloys ((Zr, x%Nb) with x ⩽ 1 wt.%) corroded in steam at 415 °C to resolve the niobium speciation in the metal and the oxide parts of their metal/oxide interface. By combining ...
Project aim: optimised piezoresistive thick-film compositions, especially for low-temperature applications on aluminum alloys, titanium alloys, steel and glass ...
Abstract—The practical adhesion of maleic anhydride grafted polyethylene (MAH-PE) to galvanised steel was studied using 3-point flexure tests, before and after hydrothermal ageing. Before bonding, the electro-galvanised steel was treated with γ -aminopropy ...
