Experimental study on condensation heat transfer in vertical minichannels for new refrigerant R1234ze(E) versus R134a and R236fa
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The tubes in shell-and-tube condensers, widely used in refrigeration and chemical process industries, are subjected to condensate inundation from the neighboring tubes. The aim of the present investigation is to study the effect of condensate inundation on ...
This thesis presents a system approach with the aim to develop improved concepts for small capacity, high temperature lift air-water heat pumps. These are intended to replace fuel fired heating systems in the residential sector, which leads to a major redu ...
Calorimetry has shown real potential at bench-scale for chem. and biochem. processes. The aim of this work was therefore to scale-up the system by adaptation of a std. com. available 300-L pilot-scale bioreactor. To achieve this, all heat flows entering or ...
Single pan thermal analyses (SPTA) have been performed on Cu-14.5 wt.% Sn, Cu-21.3 wt.% Sri and Cu-26.8 wt.% Sit peritectic alloys. For this purpose, a SPTA assembly has been built and calibrated. As the latent heat is a function of temperature and composi ...
A review; microstructured reactors are mainly characterized by their very-high surface to vol. ratio compared to traditional chem. reactors. Multichannel microreactors having channel diams. in the order of ten to several hundred micrometers have sp. surfac ...
Described is a method of manufacturing a module with long-term stability even though it contains a non-heat-resistant material, in particular a photosensitizer. Two glass plates (1, 2) are connected to each other round their edges with an edge-sealing stru ...
Single pan thermal analyses (SPTA) have been performed on Cu–14.5 wt.% Sn, Cu–21.3 wt.% Sn and Cu–26.8 wt.% Sn peritectic alloys. For this purpose, a SPTA assembly has been built and calibrated. As the latent heat is a function of temperature and compositi ...
A heat transfer assembly for transferring heat from a heat generating device (5) to a circulating fluid, said heat transfer assembly comprising - an evaporator device (3) having at least one microchannel (1) formed therein, in thermally conductive contact ...
Xu et al. have recently published a set of results for boiling heat transfer measurements in a multi- channel micro- scale evaporator for flow boiling of acetone in triangular cross- section channels ( hydraulic diameter of 155.4 mm). In the present collab ...
This paper discusses the effect of diameter on both flow boiling heat transfer and transition from macro to microchannel evaporation. A recently proposed three-zone flow boiling model based on evaporation of elongated bubbles in microchannels is briefly de ...
