Imaging based optofluidic interferometer on a chip
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
We present a novel image-based method to measure the on-chip microfluidic pressure and flow rate simultaneously by using the integrated optofluidic membrane interferometers (OMIs). The device was constructed with two layers of structured polydimethylsiloxa ...
We propose and experimentally demonstrate an integrated hybrid optical fiber sensing technique that combines distributed Raman-based temperature measurements with a time-domain approach for FBG dynamic interrogation using a shared optical source and receiv ...
We introduce for the first time the implementation of optofluidic lock-in spectroscopy of sub-nanoliter analyte on a microfluidic chip. Two methods, spatial modulation and pneumatic modulation with integrated optofluidic modulator, were demonstrated. (C) 2 ...
Ieee Service Center, 445 Hoes Lane, Po Box 1331, Piscataway, Nj 08855-1331 Usa2011
We present an optofluidic chip with integrated polymer interferometers for measuring both the microfluidic air pressure and flow rate. The chip contains a microfluidic circuit and optical cavities on a polymer which was defined by soft lithography. The pre ...
We use magnetic microbeads, which are magnetically self-assembled in chains in a microfluidic chip, as reaction substrates to implement two different sandwich immunoassay protocols for the detection of mouse monoclonal target antibodies. The magnetic chain ...
Abstract Microfluidics for most bio-related diagnostic applications typically requires single usage disposable chips to avoid bio-fouling and cross-contamination. Individual piece-wise manufacturing of polymeric microfluidic devices has been widely employe ...
[...] During this project, the fusion feasibility of chips produced for other applications have been tested and some critical fusion parameters have been defined. Then, with the help of FEM simulations, a new chip design has been proposed to overcome the p ...
Since the introduction of the of Micro Total Analysis Systems concept in 1990, important progress in microfluidic analytical systems has been realized. In many cases, microfluidic systems have shown improved analytical performances over classical methods, ...
SU-8 photoresist is commonly used in the field of microfabrication as structural material or for molding of microfluidic devices. One major limitation, however, is the difficulty to process partially freestanding SU-8 structures or monolithic closed caviti ...
We report on an innovative approach to on-chip detection of single fluorescently-labeled magnetic micro-particles by means of Single Photon Avalanche Diode (SPAD) arrays. Our system enables particle separation through magnetic actuation and highly sensitiv ...
