Structure sensitivity of selective acetylene hydrogenation over the catalysts with shape-controlled palladium nanoparticles

Rocio Micaela Crespo Quesada, Artur Yarulin
SP MAIK Nauka/Interperiodica, Springer, 2012
Journal paper

Abstract

The structure sensitivity of acetylene hydrogenation on catalysts with controlled shape of palladium nanoparticles was studied. Palladium particles of cubic (Pd-cub), cuboctahedral (Pd-co) and octahedral (Pd-oct) shapes were obtained by a colloidal method. Poly(N-vinyl)pyrrolidone (PVP) was used as the stabilizer of colloidal solutions. In order to eliminate the effect of the polymer on the properties of the catalyst, PVP was removed from the surface of the particles after their transfer to the support by simultaneous treatment with ozone and UV radiation. This allowed complete cleaning of the catalyst surface from the organic stabilizer without any change in the morphology of particles. The effectiveness of this treatment method was confirmed by X-ray photoelectron spectroscopy and scanning electron microscopy. It was found experimentally that the shape of nanoparticles does not influence the catalyst selectivity, but the activity decreases in the order Pd-oct > Pd-co > Pd-cub. Since octahedrons consist of (111) faces, the cubes contain only (100) faces, and the cuboctahedrons are composed of faces of both types, Pd-111 is more active than Pd-100. Calculations with the use of a statistical method showed that the similar to 3-nm Pd octahedrons are nanoparticles with optimum shape and size, giving maximum catalyst activity.

Official source

https://infoscience.epfl.ch/record/176790?ln=en

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related concepts

Related publications

Rational Design of Pd-Based Catalysts for Selective Alkyne Hydrogenations

Rocio Micaela Crespo Quesada

Traditionally, the search for active and selective catalysts involved a rather tedious "hit-and-miss" approach in which hundreds, if not thousands catalysts were tested until the optimal substance was identified. With the advancing theoretical understanding of catalysis and the development of computational power, a new era of rational catalyst design is dawning. This approach, grounded on first principles, is based on new advances in synthesis, characterization and modeling with the ultimate aim of predicting the expected behavior of a catalyst based on chemical composition, molecular structure and morphology. The rational design of a catalyst is a complex process which spans across several levels of scale. In this thesis, the pursuit of a rational design for Pd-based catalysts effective in alkyne hydrogenations is presented. A multi-level integrated approach was thus applied ranging from the nano-scale design of the active sites for a specific reaction, taking into account its structure sensitivity, to the micro-scale design of the supported Pd nanoparticles including metal-additive and metal-support interactions as well as mass and heat transfer phenomena. In order to rationally design a catalyst at a nano-scale, i.e. a catalyst's active site, several methodologies have been hitherto applied, such as the study on single crystals or model catalysts. Here we present the use of metal nanoparticles with tuned sizes (5-30 nm) and shapes (cubes, octahedra and cube-octahedra) prepared via colloidal techniques. These nanoparticles can be tested per se and represent a new generation of model catalysts, complementing single crystal studies, which inherently lack the complexity of industrial catalysis. However, metal nanoparticles, especially those prepared in a controlled manner in order to tailor their shape and size, require the use of stabilizing and/or capping agents capable of directing their growth. These substances can mask the true catalytic behavior of the nanoparticles. Thus, it is of great importance to study the interactions of the active phase with the substances that are in close contact with it, in the so-called meso-scaled level of rational catalyst design. Therefore, the effect of the nature of the stabilizing agent on the catalytic response was studied, as well as the promoting effect of some of these substances. Finally, a methodology was developed capable of eliminating organic stabilizing agents from the surface of nanoparticles without compromising their morphological stability. The knowledge gathered in the first two levels can be applied further to reach the microscale rational catalyst design. In this thesis, a final catalyst consisting on well-defined stabilizer-free supported Pd nanoparticles was used in the hydrogenation of acetylene. This deep study of the catalytic behavior of well-defined Pd catalysts throughout several levels of scale and complexity have given us the tools needed to perform a rational catalyst design for alkyne hydrogenations. Depending on the specific reaction, the active phase can be optimized in terms of the desired activity and selectivity and can be tuned even further with the use of specific additives. Finally, the appropriate support also exerts a promoting effect on the nanoparticles and ensures their anchoring in addition to avoiding heat and mass transfer artifacts.

EPFL2011

Life sciences have a constantly growing need for novel methodological approaches suitable to investigate the intracellular environment with increased temporal and spatial resolutions. Recently, optical near-field probes, such as laser-irradiated pointed metal, uncoated/metal-coated tapered optical fibers, as well as nano-emitters, such as single molecules or nanoparticles, have attracted increasing attention as key components of high-resolution microscopes. In parallel, super-resolution fluorescence microscopy, operating in far-field regime and overcoming the light diffraction limit, has markedly improved imaging resolution. Although both near- and far-field optical approaches drastically improve image resolution, they still represent numerous drawbacks, such as, technical difficulties concerning probe preparation (near-field) or potential damaging through very high light intensities (far-field). The aforementioned shortcomings of high-resolution optical microscopy can be overcome to a great extent by photonic force microscopy (PFM). PFM employs a strongly focused near-infrared (NIR) laser light to hold a dielectric or metallic particle as a local probe. Such an optical trap enables one to ‘cage’ a mesoscopic particle and track its three-dimensional (3D) thermal fluctuations in the surrounding environment, e.g. a viscous liquid. Therefore, besides offering near-field 3D imaging, PFM reports also on other important quantities concerning local mechanical properties, including force and viscosity as well as dynamical properties of the surrounding medium. This additional information is derived from the careful analysis of the jittery motion (so-called Brownian motion) of the trapped single-particle probe that collides with thermally-activated surrounding molecules. In this thesis, we first study in detail the Brownian motion of a single spherical particle that is confined within the harmonic potential of the optical trap. To this end, we optimize the NIR light path and electronic noise floor of our custom-built PFM set-up for detecting and quantifying resonances in the Brownian motion. These resonances arise from the coupling between the hydrodynamic memory and strong strength of the optical trap. Due to the high sensitivity of the short-time dynamics, the size of the particle can be measured by simultaneous fitting of the velocity autocorrelation function and power spectral density of its thermal fluctuations. In order to choose the best-suitable spherical probe for a given experiment in PFM, computational modeling based on a Matlab toolbox is performed. The generalized Lorenz-Mie theory is computed using the T -matrix method for various experimental conditions, including changes in the size and refractive index of the sphere, as well as different laser polarization states. The axial equilibrium position is examined to predict its location compared with the position of the laser focus. Optical forces acting on the sphere are investigated in 3D to highlight, in particular, the limits of the perfectly harmonic potential assumption. These limits are quantified and discussed. Subsequently, we identify different types of inorganic nano/micro-sized particles that can be trapped by the NIR laser of the PFM and used simultaneously as mechanical and near-field light sources. To this end, we take advantage of the visible light emission from single probes confined in the optical trap and excited by the NIR laser light. The emphasis is on particles revealing nonlinear optical properties. In particular, nonlinear optical field enhancement resulting from excitation of surface plasmon resonance (SPR) on trapped gold particles of 200 nm is demonstrated by measuring the emission of that second-harmonic generation (SHG). Furthermore, we show, under optical trapping conditions, SHG emission from single potassium niobate (KNbO3) nano/micro-sized particles. We also report on the multicolor upconversion luminescence (UCL), at the single particle level, for randomly shaped crystals of sodium yttrium fluoride codoped with ytterbium and erbium, NaYF4:Yb,Er (UCC), when they are held in the optical trap. In parallel, 3D Brownian fluctuations of a single trapped particle are quantified. Moreover, luminescence resonance energy transfer (LRET) between a KNbO3 particle or an UCC and molecules of an organic dye (rose bengal) adsorbed on their surface is highlighted and analyzed. Finally, randomly shaped UCCs and hexagonal nanoplates are characterized in detail at the single particle level. The hexagonal β phase in the polycrystalline and monocrystalline crystals is identified, in both randomly and hexagonally shaped particles by electron microscopy. UCL emission from the trapped crystal is quantified in terms of power and found to be dependent on the laser power density, size and shape of the particle as well as its orientation within the trap. Most importantly, the different colors in the UCL spectrum do not vary with the same trend for different orientations of the randomly or hexagonally shaped crystal upon trapping. This suggests the existence of crystalline anisotropy-dependent UCL. Thereby, we should be able to design the best-suited particle probe for LRET experiments with subwavelength resolution.

EPFL2013

Novel catalytic applications of carbon nanofibers on sintered metal fibers filters as structured supports

Marina Ruta

Supported metal catalysts are important from both an industrial and a scientific point of view. They are used, amongst others, in large-scale processes such as catalytic reforming, hydrotreating, polymerization reactions and hydrogenations. Often, these catalysts consist of nanosized metal particles deposited on a suitable support, which acts as an anchor for the active phase and, in several cases, contributes to improve the overall catalyst performances. The growth of carbon nanofibers on sintered metal fibers filters (CNF/SMF) by hydrocarbons catalytic decomposition results in a structured composite material presenting all the suitable characteristics for its application as catalyst support. The main objective of this thesis was to develop novel catalytic systems based on CNF/SMF as catalytic support for continuous gas-phase hydrogenations. At first, the synthesis of CNF/SMF was optimized to tailor the properties of the material for further applications as catalytic support. The use of ethylene as carbon precursor and high synthesis temperature (973K) provided high yields of well-ordered CNF with increased specific surface area (SSA), up to 516 m2/g. On the other hand, the synthesis of CNF by ethane decomposition, which is less reactive than ethylene, resulted in a support with higher permeability, minimizing the pressure drop and being more suitable in a continuous-flow reactor. After the synthesis, the CNF surface was activated by treatment with O3 or H2O2. A novel technique, which consist of XPS analysis after step-wise TPD in UHV conditions, was developed and applied for the surface characterization. It allowed to assess the nature of the functional groups created on the CNF surface. The O3-activation was found the most effective for increasing the acidity of the CNF/SMF surface, yielding a relatively high amount of carboxylic functional groups. These groups are important because involved in the chemical anchoring and stabilization of the active metal deposited on the support. Industrially, many hydrogenations are performed over supported metal catalyst. The majority of these reactions are known to be structure sensitive reactions, so the control of the metal particle size is crucial in order to study the catalyst activity and selectivity. We prepared monodisperse-sized Pd nanoparticles (8, 11 and 13 nm) via the reverse microemulsion method and deposited on CNF/SMF and activated-CNF/SMF for a two-fold study: the effect of the nanoparticles size and the effect of the support nature on the selective hydrogenation of acetylene. The antipathetic size dependence of the TOF disappeared at particle size bigger than 11 nm. The initial selectivity to ethylene (∼60%) was found size-independent. The structure-sensitivity relations have been discussed in terms of "geometric" and "electronic" nature of the size-effect and rationalized assuming a Pd-Cx phase formation which is known to be size-dependent. CNF/SMF supports with increased acidity diminished the formation of coke and changed the by-products distribution, diminishing the catalyst deactivation. Subsequently, CNF/SMF was applied to develop a new catalytic system: the Structured Supported Ionic Liquid Phase (SSILP) catalyst, embedding an active Rh complex. The selective gas-phase hydrogenation of 1,3-cyclohexadiene to cyclohexene was used as model reaction. The SSILP based on CNF/SMF supports showed a high turnover frequency, up to 250 h-1 and selectivity > 96%. Multiple advantages of supporting a homogeneous active phase, dissolved in IL, on CNF/SMF have been demonstrated: the thin layer of IL was homogeneously distributed over the mesoporous support, so mass transfer limitations could be avoided, furthermore the chemical inertness of the CNF prevented any interaction between the active phase dissolved in IL ensuring an efficient use of the Rh complex. The SSILP concept can be applied not only for the "heterogenization" of a transition metal catalyst, but also to obtain metal nanoparticles with monodispersed size via the reduction of a metal precursor dissolved in IL. In this case, IL provides a suitable environment for the nucleation and growth of the nanoparticles. By applying the SSILP concept to the selective hydrogenation of acetylene, the influence of IL on the stability of the nanoparticles was investigated. Moreover, the different solubilities of reactants and products in the IL phase allowed to improve the selectivity toward ethylene. Monodispersed Pd nanoparticles of 5 and 10 nm in SILP on CNF/SMF showed excellent long-term stability. The lower solubility of ethylene than acetylene in the IL had the beneficial effect of allowing high selectivity to ethylene up to 85%, due to the inhibition of its consecutive hydrogenation to ethane. In conclusion, a novel catalytic system for continuous-flow, gas-phase hydrogenations was conceived, taking advantage of the suitable characteristics of CNF/SMF supports. The SSILP concept, involving both homogeneous and heterogeneous active phases has been demonstrated, indicating a great potential and flexibility for continuous-flow industrial applications.

EPFL2008