High Temperature Mechanical Spectroscopy Study of 3 mol% Yttria Stabilized Tetragonal Zirconia Reinforced with Carbon Nanotubes
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Different Au-Ag-Cu samples have been studied by mechanical spectroscopy. Both polycrystals and bi-crystals show a relaxation peak at 800 K, accompanied by an elastic modulus change. Since this peak is absent in single crystals it is related to the presence ...
Polska Akad Nauk, Polish Acad Sciences, Inst Metall & Mater Sci Pas2015
Auger-ionized free-carriers in a one-dimensional semiconductor are predicted to result in a strong band-gap renormalization. Isolated single-walled carbon nanotubes (SWCNT) under high-intensity laser irradiation exhibit strong nonlinear photoluminescence ( ...
Institute of Physics (IoP) and Deutsche Physikalische Gesellschaft2016
The effects of thermal treatments on a Co-Ni-Cr super-alloy in the temperature range from 250 degrees C to 900 degrees C, resulting in secondary hardening, have been studied by Mechanical Spectroscopy. The simultaneous evolution of the internal friction sp ...
The paper is a review of original results, which were obtained by mechanical spectroscopy in the development of industrial materials, such as grey cast iron (damping capacity), aluminum alloys (recrystallization), nickel alloys (grain boundary embrittlemen ...
Polska Akad Nauk, Polish Acad Sciences, Inst Metall & Mater Sci Pas2015
Phase transitions in AuCu alloy are investigated using in situ temperature XRD and mechanical spectroscopy. The measurements are carried out from room temperature up to 973 K starting from the ordered phase AuCuI. Using a temperature ramp rate of 1 K/min, ...
This review paper shows that grain boundary sliding (GBS) is a general phenomenon occurring in all classes of inorganic materials: ceramics, metals and composite materials. The occurrence of relaxations attributed to GBS is also quite general and therefore ...
The method of fabricating composites composed of a glass micro ber matrix and the conductive nano bers is proposed. The nano bers incorporating single-walled carbon nanotubes (SWCNTs) and an organic material are spread over the surface of glass micro bers ...
We have studied a binary Au-Cu single crystal by mechanical spectroscopy. Upon very slow cooling from high temperatures, additional relaxation peaks arise at lower frequencies in isothermal spectra after the disappearing of the Zener peak below 665 K due t ...
Polska Akad Nauk, Polish Acad Sciences, Inst Metall & Mater Sci Pas2015
Cemented carbides are widely used in the cutting tools industry for their mechanical properties. They are composite materials made of hard tungsten carbide grains jointed together by a ductile cobalt binder. Due to the extreme conditions of use of the tool ...
Oxide Dispersed Strengthened (ODS) ferritic stainless steels present well-known fine grains microstructures where dislocation movement is hindered by a dense precipitation of nano-oxides particles. Previous research, on the thermomechanical behavior at hig ...