Structure and energetics of diphenylalanine self-assembling on Cu(110)

Klaus Kern, Magalí Alejandra Lingenfelder
2007
Journal paper

Abstract

We investigate the dynamical features of the adsorption of diphenylalanine molecules on the Cu(I 10) surface and of their assembling into supramolecular structures by a combination of quantum and classical atomistic modeling with dynamic scanning tunneling microscopy and spectroscopic experiments. Our results reveal a self-assembling mechanism in which isolated adsorbed molecules change their conformation and adsorption mode as a consequence of their mutual interactions. In particular, the formation of zwitterions after proton transfer between initially neutral molecules is found to be the key event of the assembling process, which stabilizes the supramolecular structures. Because of the constraints on the intermolecular bonds exerted by the surface-molecule interactions, the assembly process is strictly stereoselective, And may suggest a general model for patterning and functionalization of bare metal surfaces with short chiral peptides.

Official source

https://infoscience.epfl.ch/record/179649?ln=en

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related concepts

Related publications

In the framework of this thesis self-assembled supramolecular architectures of several molecular species on crystal metal surfaces are characterized. These investigations combine results obtained by means of scanning tunneling microscopy (STM), scanning tunneling spectroscopy (STS), X-Ray Photoelectron Spectroscopy (XPS), and Near-Edge X-Ray Absorption Fine Structure Spectroscopy (NEXAFS). The interest in controlling the formation of specific arrangements of supramolecular ensembles at surfaces is motivated to a great extent by the prospect to design molecular devices and nanomaterials with customized properties. The goal is a "spontaneous" creation of targeted, well-ordered molecular architectures, which shall be achieved by taking advantage of the molecule's propensity to self-assemble. Control means, in this context, predictability. This term address the accuracy of the prediction of the structures resulting from molecular self-assembly for systems exhibiting different characteristics. Here, system stands for a particular combination of a single-crystal surface and adsorbed molecular species. In a first part, the focus is given to the impact of a Pd(111) surface exhibiting high chemical activity. Due to surface induced deprotonation two resulting chemical states are found for the adsorbed terephthalic acid species. Deprotonation of the carboxyl moieties is observed to affect the topology of the molecular assemblies even though hydrogen bonds (H-bonds) are responsible for the stabilization of assemblies of both, intact and deprotonated molecular species. Therefore, the selective fabrication of a single specific molecular structure becomes a challenge when the surface is prone to induce chemical reactions. Secondly, a molecular species exhibiting conformational flexibility is studied on a largely inert Au(111) surface. It is observed that the characteristic conformational flexibility is also active on the surface, and the molecule is found to adopt different conformations depending on the locally most favorable bonding motif. In particular, phenyl groups may undergo a rotation such that one-dimensional chains can be stabilized by means of intermolecular H-bonds. This phenomenon is very interesting from an adsorbate-substrate interaction point of view, but it limits the predictability of supramolecular structures formed upon self-assembly. In a third step, a comparative study of the self-assembly of three closely related molecular species highlights the impact of concurrent competing intermolecular interactions. Molecules exhibiting an increasing number of possible interaction channels are found to assemble into an increasing number of distinct supramolecular architectures. The most flexible molecular species allowing for different hydrogen-bonding patterns as well as dipolar coupling self-assembles into various structurally complex architectures. Structural predictability, however, is low since the formation of one or the other assembly appears to depend on small variations in sample preparation conditions and on poorly controllable local surface properties. Finally, a system where the resulting structures fully agree with predictions evidences the possibility to control the formation of targeted specific supramolecular architectures. The formation of well ordered bimolecular ribbons and wires over extended length scales is accomplished by the rational choice of both, complementary building blocks for the selective formation of three-fold H-bonds and a nanostructured surface to guide the molecular self-assembly. Furthermore, the impact of H-bond formation on the electronic structure of self-assembled molecular building blocks is probed by STS measurements. The experimental data reveal shifts in the electronic levels depending on the H-bond configuration and on the local characteristics of the underlying surface. In order to improve the precision of such a study, single molecules, homo- and heteromolecular dimers as well as trimers are successfully isolated and assembled by molecular manipulation with the STM tip. Further STS studies on such artificially assembled structures are suggested.

EPFL2008

Single-molecule-level characterization of supramolecular systems at surfaces

Dietmar Payer

This thesis deals with the self-organization of individual building blocks, specifically organic molecules and metal atoms, into supramolecular structures on metal surfaces under ultra high vacuum conditions (UHV). Self-organization of supramolecular systems is a promising candidate for a bottom-up approach in the fabrication of complex structures with specific properties. This process is steered by interactions between functional groups of the individual building blocks and is of apparent interest to gain a detailed understanding of the influence and the behavior of these functional groups enabling intermolecular binding. In the first part of the thesis, we investigate hydrogen bonded structures on metal surfaces. Of especial interest is the possibility of the formation of ionic hydrogen bonds, a special class of hydrogen bond which connects a charged donor (acceptor) and a neutral acceptor (donor) and is important in biological systems. By combined Scanning Tunneling Microscopy (STM), X-ray Photoelectron Spectroscopy (XPS) and Near Edge X-ray Absorption Fine Structure (NEXAFS) measurement we show the deprotonation of carboxylic functions in the molecules, forming carboxylate groups involved in intermolecular binding. With our complementary experimental and theoretical examinations we clearly show that the carboxylate groups are indeed still charged although adsorbed onto a conducting metal surface and that the observed structures can be computationally reproduced by using these charges in classical molecular dynamic calculations. Our investigations clearly reveal that all requirements for the formation of ionic hydrogen bonds in these samples at metal surfaces under solvent free conditions are fulfilled. In the second part, the confinement of surface state electrons in self-assembled hydrogen-bonded structures is investigated. The examined structure contains two-dimensional cavities, with different inner diameters in the periodic arrangement and in domain boundaries. Inside the cavities we detect a spatially localized modification in the local density of states (LDOS) of the Ag(111) surface state electrons. The energy of the peak correlates with the cavity area as predicted by a simple "particle in a box" model. This clearly shows that the surface state electrons form a confined state inside the cavities. Furthermore we examine self-assembled periodic structures as templates for binding single macrocyclic molecules. The macrocyclic molecules can be deposited by sublimation, as STM-topographs with submolecular resolution reflect the shape of the intact molecules and reveal a coverage dependent aggregation behavior. We show that it is possible to fabricate a structure in which at most one macrocyclic molecule per pore can be found in a defined binding position. In the last part of the thesis we investigate the influence of individual metal atoms on the chemical activity and the self-assembly process of molecules on metal surfaces. First, we demonstrate the high chemical reactivity of these metal atoms. In our experiments we address the chemical reactivity of static active sites, like kinks and step edges, and of dynamic active sites, like the metal atoms, separately. Doing this we show that a non-negligible amount of the chemical reactivity of a metal surface is due to this dynamic adatom gas. Furthermore the influence of metal atoms on the structure formation of organic molecules is investigated. We show that two-dimensional structures based on a complex formation between metal centers and ligands can be formed and that the coordination number is independent of the substrate symmetry. Furthermore, we show the possibility that on metal surfaces one can prepare three-fold coordinated Fe-centers, a coordination number which is rarely seen in three dimensional chemistry. In the last part we study catenanes, which consist of two interlocked macrocyclic molecules. Main interest is on the confirmation of a structural change of the catenanes adsorbed on a metal substrate. For our experiments we use the fact that the catenanes are designed to "trap" a Cu-atom by complex formation. As this reaction is associated with a structural change and a change in intermolecular interaction, we can verify a reaction of catenanes adsorbed onto a surface with Cu adatoms and therefore a structural alteration by simply imaging the formed structures. Our measurements show the possibility of depositing large molecules like catenanes by sublimation and of their potential for use as molecular machines adsorbed onto metal surfaces.

EPFL2007

Supramolecular structures of polypeptides

Daniela Silvano

The formation of supramolecular structures is a central issue in bio- and nanotechnology and therein plays an important role for many novel developments such as biocompatible materials for integrating living cells or coating for implantable sensing devices as well as for designing smart molecular sensor surfaces for miniaturized bioanalytical techniques. The main focus of this thesis is the investigation of polypeptide layers on surfaces, in particular the formation of self-assembled monolayers (SAMs). SAMs made of long hydrocarbon chains or aromatic molecules comprising surface active and other functional groups have been deeply characterized over decades. Surprisingly, peptide SAMs did not meet the same strong interest despite their great potential in several areas. Natural (20) and artificial amino acids with different physical and chemical properties offer a plethora of novel possibilities to design coating of solid surfaces. In fact their combination in simple oligopeptide sequences provides a huge number of molecular components for the formation of SAMs. Control of SAM features such as density, flexibility, adaptability, interface properties, by tailoring the amino acid sequence opens a new route to manifold applications ranging from fundamental research to nano- and biotechnology. In this thesis different and complementary techniques have been used to investigate the self-assembling ability of polypeptides on surfaces with different physical and chemical properties. Infrared spectroscopy and circular dichroism allowed the determination of the peptide secondary structure on surfaces and in solution. Surface plasmon resonance provided the optical thicknesses of peptide SAMs on gold whereas contact angle measurements have been used to characterize their interfacial properties. In the first part of the thesis, a series of hydrophobic peptides (Ac-Cys-Alax-CONH2, x=3-6) have been self assembled on gold via the thiol group present in the cysteine. The main interest was whether these peptides formed densely packed SAMs with a defined secondary structure within the layer and how the properties of such SAMs depended on the length of the polypeptide backbone. The second part concerns the study of the interactions of an amphipathic helical peptide with various functionalized substrates. The aim was to investigate whether a proper design of the peptide could be used to predetermine its secondary structure on the substrate and whether the orientation of the peptide on the surface could be directly controlled via certain parameters of the surrounding medium. Since the hydrophilic residues of the peptide are histidines, a particular effort was spent in characterizing the peptide adsorption on substrates exposing nitrilotriacetic acid (NTA) moieties. Once established that the adsorption process did not alter its helical structure, the peptide was adsorbed on a substrate exposing two different functional groups: NTA, that could interact with the histidine residues, and methyl groups, that could interact with the hydrophobic ones. The goal was to bind the peptide in different orientation to the same substrate, exploiting the particular spatial distribution of its residues. The third part of this thesis concern the formation of nano- and micro-sized fibrils through molecular self-assembly of simple oligopeptides and protected amino acids. Such systems were chosen as models to investigate the role of the different driving forces in the formation of fibrillar structures. The aromatic protecting group being fixed, it could be shown that the protected amino acids formed fibrils with different sizes and morphologies, or did not form fibrils at all, depending on how strongly their side chains interact. The possibility of forming fibrils by using protected amino acids is of major importance not only in bio-related field but also in organic nanotechnology.

EPFL2008

Single-molecule-level characterization of supramolecular systems at surfaces

Dietmar Payer

EPFL2007

Supramolecular structures of polypeptides

Daniela Silvano

EPFL2008