Magnetic states of an individual Ni nanotube probed by anisotropic magnetoresistance

Defined magnetization states in magnetic nanotubes could be the basic building blocks for future memory elements. To date, it has been extremely challenging to measure the magnetic states at the single-nanotube level. We investigate the magnetization states of an individual Ni nanotube by measuring the anisotropic magnetoresistance effect at cryogenic temperature. Depending on the magnitude and direction of the magnetic field, we program the nanotube to be in a vortex- or onion-like state near remanence.

Anna Fontcuberta i Morral, Dirk Grundler, Martin Heiss, Daniel Rüffer, Eleonora Russo

2012

Magnetic states and spin-wave modes in single ferromagnetic nanotubes

Daniel Rüffer

In this thesis the electrical properties, magnetic states and spin wave resonances of individual magnetically hollow ferromagnetic nanotubes have been studied. They were prepared from the different materials Nickel (Ni), Permalloy (Py) and Cobalt-Iron-Boron (CoFeB), deposited as shells onto non-magnetic Gallium-Arsenide (GaAs) semiconductor nanowires via Atomic Layer Deposition (ALD), thermal evaporation and magnetron sputtering, respectively. The resulting nanotubes had lengths between 10 to 20 μm, diameters of 150 to 400 nm and tube walls (shells) which were 20 to 40nm thick. Structural analysis of the tubes by Transmission Electron Microscopy revealed a poly(nano)crystalline (Ni, Py) and amorphous (CoFeB) structure. Electrical transport experiments as a function of temperature revealed different transport mechanisms for each of the materials. Electron-phonon scattering dominated the temperature dependence of the resistivity in Ni, while a clear evidence for electron magnon scattering was observed in Py. Electron-electron interaction in granular and amorphous media was identified as the major contribution to the temperature dependence in CoFeB. The Anisotropic Magnetoresistance (AMR) ratios have been determined for all tubes and different temperatures. Ni nanotubes exhibited a large relative AMR effect of 1.4% at room temperature. The AMR measurements provided information about the magnetic configurations as well as the magnetization reversal mechanism. Indications for the formation of vortex segments in Ni tubes were found for the magnetization reversal when the magnetic field was perpendicular to the nanotube axis. In cooperation with the Poggio group in Basel, cantilever magnetometry has been used for the further characterization of the nanotube magnetization. The magnetization curves were compared to the AMR measurements and finite element method (FEM) micromagnetic simulations. The comparison between the experimental results and the simulations suggested that the roughness of Ni tubes gave rise to segmented magnetic switching. An almost perfect axial alignment of the remanent magnetization has been observed in Py and CoFeB nanotubes. The influence of the inhomogeneous internal field in transverse magnetic fields was investigated by simulation. The segment-wise alignment of spins with the field direction is argued to provoke characteristic kinks in the hysteresis curve and measured AMR effect. Magnetothermal spatial mapping experiments using the anomalous Nernst effect (ANE) complemented the magnetotransport experiments in cooperation with the group of Prof. Grundler in Munich. Here, first evidence of end-vortices entering the nanotube before reversal could be found. Electrically detected spin wave resonance experiments have been performed in cooperation with the group of Prof. Grundler on individual nanotubes. The detected voltage, generated by the spin rectification effect, revealed multiple resonances in the GHz frequency. The experimentally observed resonances were compared to calculated ones extracted from dynamic simulations. With this comparison, the signatures could be attributed to azimuthally confined spin-wave modes. The deduced dispersion relation suggested the quantization of exchange dominated spin waves in that resonance frequencies follow roughly a quadratic dependence on the wave vector.

EPFL2014

Effect of Heat Current on Magnetization Dynamics in Magnetic Insulators and Nanostructures

Francesco Antonio Vetrò

The term "spin caloritronics" defines a novel branch of spintronics that focuses on the interplay between electron spins with heat currents. In the frame of this research area, this thesis is aimed at investigating the effect of a heat current on magnetization dynamics in two different typologies of systems and materials: magnetic insulators and metallic nanostructures. In the first case we conduct studies on yttrium iron garnet (YIG) samples subjected to a temperature gradient. The irreversible thermodynamics of a continuous medium with magnetic dipoles predicts that a thermal gradient across a YIG slab, in the presence of magnetization waves, produces a magnetic field that is the magnetic analog of the well known Seebeck effect. This thermally induced field can influence the time evolution of the magnetization, in such a way that it is possible to modulate the relaxation of the precession when applying a heat current. We found evidence for such a magnetic Seebeck effect (MSE) by conducting transmission measurements in a thin slab of YIG subjected to an in-plane temperature gradient. We showed how the MSE can modulate the magnetic damping depending on the direction of the propagating magnetostatic modes with respect to the orientation of the temperature gradient. In the second part of the thesis we focus our investigation on metallic nanostructures subjected to a heat current. In a metal, the three-current model (current of entropy, of spin up and spin down electrons) predicts that a heat current induces a spin current which will then influence the magnetization dynamics like a charge-driven spin current would. Hence, we explore what has been called Thermal Spin Torque in electrodeposited Co / Cu / Co asymmetric spin valves placed in the middle of copper nanowires. These samples are fabricated by conventional electrodeposition technique in porous polycarbonate membranes using an original method that allows high frequency electrical measurements. We used a modulated laser to investigate the effect of a temperature gradient. We observed a heat-driven spin torque by measuring electrically the quasi-static magnetic response of a spin valve when subjected to the heat current, generated by two laser diodes heating the electrical contact at one end or the other of the nanowire. Analysing the variation in the resistance induced by a heat-driven spin torque, represented by peaks occurring in correspondence with the GMR transition, we found that a temperature difference of the order of 5 K is sufficient to produce sizeable torque in spin valves.