Piezoresistive effect in epoxy–graphite composites
Related publications (35)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
This is the second in a series of three columns summarizing the "Trends" expert sessions organized by the Signal Processing Society Technical Committees during ICASSP 2011 in Prague, Czech Republic. Readers have an opportunity to access these Trends sessio ...
Nanoelectromechanical systems (NEMS) offer the potential to revolutionize fundamental methods employed for signal processing in today's telecommunication systems,1-4 owing to their spectral purity and the prospect of integration with existing technology. I ...
This paper presents the experimentally obtained gauge factor (GF) of 4H-SiC piezoresistors, fabricated out of the n-type epitaxial layer and characterized on millimeter-size SiC cantilever beams at room temperature. It was found that the GF is dependent on ...
In this work, we investigate the piezoresistive response of epoxy-graphite composites. A resistive thick-film Wheatstone bridge is deposited by screen-printing onto an alumina beam, a weight is then applied on the tip of the beam and the resulting electric ...
Elsevier Science, Reg Sales Off, Customer Support Dept, 655 Ave Of The Americas, New York, Ny 10010 Usa2011
We report the modeling, and geometrical and electrical characterization, of inkjet and screen-printed patterns on different polymeric substrates for use as antennas in radio-frequency identification (RFID) applications. We compared the physical and electri ...
Although inorganic thick-film materials are usually very stable, load sensors (i.e. force, torque and pressure) based on the piezoresistive effect of thick-film resistors often exhibit some drift, with major contributions stemming from a) temperature chang ...
In this thesis, we proposed to study polymer-based thick-film resistors (TFRs) made of graphite particles dispersed in an epoxy matrix. Three main axes were investigated: formulation of the composites, characterization with the determination of electrical, ...
Strain response of polycrystalline barium titanate (BaTiO3) was investigated under high unipolar electric field (0 to 4 kV/mm) and compressive stress (0 to 400 MPa) in the temperature range from 25 to 160 degrees C. In the vicinity of the Curie point (T-C) ...
This work was originally motivated by the search for high-temperature piezoceramic materials with low acoustic impedance and high electromechanical coupling. The temperature and pressure behavior of two PZT-based materials with engineered porosity, Pz31 & ...
Infrared (IR) reflectivity spectra of nominally pure Pb(Zr1-xTix)O-3 ceramics with different Ti/Zr concentration (x = 0.42-0.58) were measured and evaluated, along with the time-domain terahertz transmittance spectra in the temperature range 10 K-900 K. Th ...