A 3-D coupled hydromechanical granular model for simulating the constitutive behavior of metallic alloys during solidification
Related publications (51)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The tensile elongation of an < 011 > oriented columnar nanocrystalline pure iron structure at a temperature of 300 K has been simulated by molecular dynamics (MD). The simulated sample contains 4.3 x 10(6) atoms and has been subject to free elongation alon ...
In this project a new fabrication strategy for suspended microchannel resonators (SMRs) is described. SMRs are biosensing devices with the liquid flowing inside of them, allowing real time measurements of fluidic samples, while devices can be kept in dry e ...
The eutectic micro-constituent in SnAgCu solder governs the deformation behavior of the joint as it shows better deformation resistance than the Sn dendrites and occupies a high volume percentage of the whole solder. The main scope of this study is to deve ...
Continuous-fiber ceramic matrix composites (CMCs) are of interest as hot-section components in gas turbine engines due to their refractoriness and low density relative to metallic alloys. In service, CMCs will be subjected to spatially inhomogeneous temper ...
Silicon nitride based ceramics (SiAlONs); tetragonal polycrystalline zirconia (3Y‐TZP); alumina and their composites reinforced with different amount of multi‐ walled carbon‐nanotubes (CNTs) have been processed by Spark Plasma Sintering (SPS). High tempera ...
Microstructures in serpentine samples recovered from deformation experiments performed at high pressure (1-8 GPa), high temperature (150-500 degrees C), and laboratory strain rates (4 10(-4)-10(-6)s(-1)) were studied using transmission electron microscopy ...
This paper presents a three-dimensional elastic viscoplastic model that can describe the time-dependent behaviors of soft clays. The constitutive model is formulated based on the nonstationary flow surface theory and incorporates new developments, includin ...
A coupled hydromechanical granular model aimed at predicting hot tear formation and stress-strain behavior in metallic alloys during solidification is applied to the semicontinuous direct chill casting of aluminum alloy round billets. This granular model c ...
New data are presented on dynamic measurements of elasticity and anelasticity of several poly- and single crystalline Ni1+xTi1-x alloys for frequencies between 0.05 and 100 kHz over a wide temperature range below room temperature. Anelastic effects, previo ...
Intermetallic phases formation is one of the phenomena, which when coupled to thermal and mechanical strains leads to the premature wear of aluminium die casting tools made out of steel. This work focuses on two aspects of this wear problem. The first and ...