Click-Functionalized Ru(II) Complexes for Dye-Sensitized Solar Cells

Ryan Dykeman, Paul Joseph Dyson, Michael Graetzel, Amaresh Mishra, Nuttapol Pootrakulchote, Shaik Mohammed Zakeeruddin
Wiley-VCH Verlag Berlin, 2012
Journal paper

Abstract

Three heteroleptic ruthenium complexes incorporating new ancillary ligands synthesized by sequential connection of different alkyl functionalities with triazole as a linker are prepared using click chemistry. These sensitizers exhibit low-energy metal-to-ligand charge transfer bands centered at 540 nm with molar extinction coefficients of up to 1.54 x 10(4) L mol-1 cm-1. The devices using these sensitizers in conjunction with a volatile electrolyte show high photovoltaic conversion efficiencies of 8.7 to 9.9% under standard AM 1.5G sunlight (100 mW cm-2) conditions. Using an ionic liquid electrolyte, the cells show not only a good power-conversion efficiency of up to 7.1%, but also promising long-term stability under full sunlight intensity at 60 degrees C. The difference in the photovoltaic parameters during the ageing process is investigated by employing transient photoelectrical measurements.

Official source

https://infoscience.epfl.ch/record/184504?ln=en

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related concepts

Related publications

It has been increasingly aware to the world today that reserves of fossil fuels are limited and their use has serious environmental side effects. Encouraged by this realization was the evolution of the use of cleaner alternative energy, among which Dye-sensitized solar cells (DSCs) are potentially attractive candidates for the lower cost of producing devices which convert an abundant amount of energy from the sun into electricity. Dye-sensitizer in DSCs plays a crucial role as the chlorophyll in plants; to harvest solar light and transfer the energy via electron transfer to a suitable material (TiO2 in this case) to produce electricity. The topic of interest for this thesis is to further enhance the photovoltaic performance and the robustness of DSCs by tuning the optical properties of the dye-sensitizer (Ruthenium complex, in this case) using several strategies including an extension of the π-conjugation system, an introduction of antenna molecules and a modification of the Ru-complex structure. This work focuses on the DSC device fabrication and photovoltaic characterization in order to investigate more insight into structure-property-device performance relationship. New benchmarks for high performance DSCs with ruthenium complex sensitizers with π-extension in their ancillary ligands were presented. The overall conversion efficiency of 9.6% and 8.5% have been achieved with Ru-based sensitizer containing ethylenedioxythiophene, using low-volatile electrolyte and solvent-free electrolyte, respectively. The Rusensitizer functionalized with hexylthio-bithiophene unit exhibited a conversion efficiency of 9.4% with low-volatile electrolyte. All these devices showed good stability under prolonged light soaking at 60 °C. Extending π-conjugation of the anchoring ligand with thiophene units in monoleptic Ru-sensitizer also yields an impressive conversion efficiency of 6.1% using 3-µm-thin mesoporous TiO2 film in corporate with low-volatile electrolyte. DSC devices based on ruthenium sensitizers functionalized with thienothiophene- and EDOT-conjugated bridge, together with carbazole moiety on the ancillary ligands were found efficient with conversion efficiencies of 9.4% and 9.6%, respectively, in presence of a volatile electrolyte. The carbazole-functionalized ruthenium-based DCSs also performed excellently in the stability test using a low-volatile electrolyte. Furthermore, the Ru-complexes synthesized by click-chemistry in association with triazole-derivative moieties were successfully used as DCS sensitizers. DSC devices sensitized with these dyes provided the overall conversion efficiency close to 10% with volatile electrolyte. Further studies with solvent-free electrolyte showed notable device stability under extending full sunlight intensity at 60 °C. The results presented here provide a fertile base for further investigation, which will focus on improving the spectral response of ruthenium dye-sensitizer to full sunlight by searching for new strategies to modify the sensitizer with more efficient functional groups. The target is to reach higher conversion efficiency of DSC devices while retaining their stability under standard reporting conditions.

EPFL2012

Solid-state dye-sensitized solar cells using TiO2 nanotube arrays on FTO glass

Jérémie Minh-Châu Brillet, Michael Graetzel, Shaik Mohammed Zakeeruddin

Highly ordered, vertically oriented TiO2 nanotube arrays were prepared by potentiostatic anodization of titanium on FTO-coated glass substrate and for the first time successfully applied in the fabrication of solid-state dye sensitized solar cells (SSDSCs), giving a power conversion efficiency of 1.67% measured under an irradiation of air mass 1.5 global (AM 1.5 G) full sunlight. Furthermore, 3.8% efficiency was reached with a 2.8 mu m thin TiO2 nanotube array film based on a metal free organic dye using ionic liquid electrolyte.

2009

D-π-A Sensitizers for Dye-Sensitized Solar Cells: Linear vs Branched Oligothiophenes

Amaresh Mishra, Mingkui Wang, Sophie Wenger, Shaik Mohammed Zakeeruddin

Two donor-π-acceptor (D-π-A) dyes, coded as L-3T-DPA 1 and B-5T-DPA 2, were synthesized for application in dye-sensitized solar cells. These D-π-A sensitizers use diphenylamine as donor, an oligothiophene as π-bridge, and cyanoacrylic acid as an acceptor group that can be anchored to the surface of TiO2. While the two dyes comprise the same donor and acceptor units, the bridging oligothiophene is linear in one case and branched in the other case. Photophysical and electrochemical properties of the dyes were investigated by UV−vis spectrometry and cyclic voltammetry. The dyes were subsequently implemented as sensitizers in dye-sensitized solar cells. Photovoltaic devices with dye 1 showed a maximum monochromatic incident photon to current efficiency (IPCE) of 80% and an overall conversion efficiency of 6.8% under full sunlight (AM 1.5G, 100 mW cm−2) irradiation. The photovoltaic performance of branched dye 2 was lower because of less dye loading on the TiO2 surface. The dyes were also tested in ionic liquid and solid-state devices and showed good efficiencies. Long-term stability measurements were performed over 1000 h at full sunlight and at 60 °C in ionic liquid devices. Branched dye 2 thereby showed excellent stability retaining 96% of its initial efficiency, while linear dye 1 retained 73% after 1000 h of irradiation.

American Chemical Society2010

EPFL2012