Mass Spectrometry based Analytical Methods for Proteome Analysis and Redoxomics

Proteomics is nowadays one of the most important research topics in life science for understanding many life activities from the molecular level. The objective is to find out proteins or modifications on proteins that regulate biological events, aging, diseases and so forth. Because of the complexity in the structure of proteins, the dynamic range of protein-abundances, and the differences from time-to-time and tissue-to-tissue, proteomics requires development of analytical methods with respect to resolution, sensitivity, speed, etc. In this thesis, analytical methods based on mass spectrometry are developed for proteome research and especially redox proteomics. Two major types of mass spectrometers are employed, including matrix-assisted laser desorption/ionization mass spectrometer (MALDI-MS) and electrospray ionization mass spectrometer (ESI-MS). Nano and micro metal oxide materials are used to modify the MALDI sample plate for in-situ extraction of phosphorylated peptides or for in-source photochemical reactions. The former is valuable for the study of protein posttranslational modifications. The latter results in online tagging of cysteine for counting the number of cysteine in peptides that is valuable information for the identification of cysteine-containing proteins. Functional microfluidic chips are designed as microreactor and ESI emitter for online chemical reactions followed with MS characterization. Specifically, the multi-channel microchip is applied in tyrosine nitration study. Tyrosine nitration is considered as a biomarker for radical associated diseases, such as cardiovascular, Alzheimer’s, and Parkinson’s diseases. With the microchip ESI-MS, a new pathway for tyrosine nitration induced by copper(II) is demonstrated. Considering that abnormally high concentration of copper(II) was found in the brain tissue of patient with Alzheimer’s disease, the current finding is important for understanding the mechanism of neurodegenerative diseases. An electrostatic-spray ionization (ESTASI) method is developed to generate ions from sample solutions. The ESTASI can be realized with various geometries, such as samples in a microchannel, in a capillary, in a micropipette and on a plastic plate. Comparing to ESI, voltage is not directly applied on the sample during ESTASI, thereby avoiding redox reactions during ionization. The ESTASI has been used to couple separation strategies with MS, including capillary electrophoresis and gel isoelectric focusing. These new methods can be useful in top-down proteomics and mass imaging.

Polymer nanospray interfaces for on-line electrochemically induced modifications

Tatiana Rohner

The aim of this work has been to design, and fabricate a miniaturized electrospray-type interface for mass spectrometry analysis, which allows the nebulization of solutions by applying a high potential difference between the source and the mass spectrometer. The fabrication of the nanospray emitter is based on UV-laser photoablation of polymer substrates. Thick-film channel flow electrodes can be integrated in the microfluidic system, allowing the application of a high voltage to generate electrospray from the open outlet of the microchannel. The polymer-based interface first presented is characterized by a flat edge interface. However, a V-shaped nozzle has been found to present higher stability and ease of use. This design also allows the generation of spray by applying high voltage through an electrode located in a solution reservoir, thereby inducing an electroosmotic pumping. Taking advantage of the intrinsic electrolytic behavior of electrospray, a specific electrochemically induced tagging of free cysteine residues located in proteins can be performed on-line. A p-hydroquinone buffer is used to perform a continuous infusion of protein solution. When in contact with the high-voltage microelectrode, p-hydroquinone undergoes oxidation, thereby producing protonated p-benzoquinone. The latter reacts with free cysteine residues, following a Michael-type addition. The modification of the protein can be followed thanks to MS analyses. A complete study of the mechanisms involved in the electrochemically induced tagging with hydroquinone has been carried out by cyclic voltammetry and digital simulation. The process of the tagging consists of an ECE mechanism, since the formed adduct is stabilized in the reduced state, and is thus free to be oxidized. The rate constant of the chemical reaction has been extracted, by performing cyclic voltammetry studies and modeling the whole system by digital simulations. Finite element simulations have also permitted to highlight several mechanistic aspects of the electrotagging. The nanospray interface has been modeled as a channel-flow electrode cell. After validation of the model with respect to the experimental results, kinetics and mass transport conditions have been investigated. The flow profile, as well as the kinetic rate constant, has been shown to be of great importance in the electrochemically induced tagging. The use of a sacrificial electrode as metallic ion source to generate electrospray has also been investigated. Transition metal electrodes, i.e. copper, zinc, nickel and iron, as well as silver, were used to get on-line complexation with model peptides. It has been demonstrated that the use of in-reservoir sacrificial electrode was an efficient method to generate metal ions in order to form complexes with peptides, without the addition of metallic salts. These studies have demonstrated that polymer nanospray interfaces can be advantageously used as analytical devices, together with their primary function, i.e. ionization sources for protein analyses by mass spectrometry.

EPFL2003

Microfluidic front-end technologies for protein electrospray mass spectrometry

Niels Erik Lion

In the present work, a polymer microfabricated microsprayer is characterised and tested for the mass spectrometric analysis of biomolecules, in particular in the context of protein mass spectrometry and proteomics. As the core of this work deals with analytical sciences and device development, Chapter 1 puts this work in perspective with the emergence of proteomics and more generally systems biology. In particular, major epistemological concepts that allowed the emergence of these new disciplines among life science research are reviewed. It is shown that the new paradigm of integrative biology did not emerge ex nihilo, but was preceded by major epistemological shifts in medicine, physics, and engineering. As such, the rise of systems biology appears as a new episode in the balance between reductionist and holistic approaches in the history of biology and medicine, and its biomedical promises are discussed. Chapter 2 reviews the state of the art in the hyphenation of microfluidic devices with electrospray mass spectrometry, both from a technical and applicative standpoint. Chapter 3 and 4 present the characterisation of the new polymer microspray for the analysis of peptides, proteins and glycoconjugates when coupled with various electrospray ion sources and instruments. In particular, a detailed comparison with classical pulled nanospray capillaries is performed, that established the performances in terms of sensitivity, stability and applicable ranges of flow rates and solvents. Chapter 5 introduces a functionalised polymer microspray for online sample clean-up. Basically, a hydrophobic polyvinylidene fluoride membrane is interfaced at the inlet of the polymer microspray to serve as a capture solid-phase of hydrophobic compounds; once captured, they can be cleaned up, and further eluted by the spray solution containing organic solvents. The process is further investigated in the presence of compounds usually used in protein sample preparation, such as chaotropes, reducing agents or detergents. Further microchip developments include the introduction of a dual channel microsprayer in Chapter 6, that allows to spray two solutions at the same time; given the microchip design, the two solutions are mixed only in the Taylor cone, where the electrospray is generated, and their respective flow rates can be controlled independently. This unique feature allows to analyse pure aqueous samples with integration of minimum amounts of organic sheath flow to promote desolvation and ionisation. Moreover, when proteins are analysed, it allows to measure them in their folded state, as demonstrated by their charge state distribution in the mass spectrum. Further tuning of the organic sheath flow allows to denature the protein within the Taylor cone, which can be monitored by the evolution of the protein charge state distribution in the mass spectrum. Potential of this technology for protein thermodynamic stability measurement is discussed. Lastly, Chapter 7 presents in silico evaluation of two technologies developed in the laboratory, namely Off-Gel electrophoresis for isoelectric fractionation of proteins and peptides mixtures, and online counting of cysteine residues within peptides during their analysis by electrospray mass spectrometry, to provide useful information to speed-up proteome profiling: if one wants to seek within a whole digested proteomes for peptides that are unique, measurement of their mass alone is hardly sufficient to perform useful protein identification, even with very high resolution, high mass accuracy instruments. The purpose of these simulations is to estimate how much information peptide isoelectric point and number of cysteines within each peptide provide in terms of number of unique peptides (and hence unambiguous peptide identification without MS/MS). Applicability of this strategy for high-throughput proteome profiling and its limitations are further discussed.

EPFL2006

Miniaturized analytical systems for mass spectrometry-based protein studies

Mélanie Abonnenc

Current proteomic strategies depend strongly on the development of analytical methodologies and instrumentation. In parallel to the development of mass spectrometry (MS) - based proteomic workflows, microfluidic devices emerged in this field as a flexible tool for rapid and sensitive protein studies. In this context, the present work focuses on the development of miniaturized analytical systems for protein studies, especially by electrospray ionization mass spectrometric detection. Several approaches have been proposed to complement the mass spectrometric analysis of tryptic peptides using chemical tagging to isolate specific subclasses of proteins by affinity baits or for quantitation purposes. Optimization of a chemical tagging reaction in a sandwich mixer-reactor that consists of mixing two solutions providing the reactants in a channel, one central laminar flow being sandwiched between two outer flow solutions, was first investigated by finite-element method. The numerical simulations have highlighted the importance of positioning the reactant presenting the lowest diffusion coefficient close to the sidewall, as well as decreasing the outer flow velocities, to enhance a chemical reaction because of the parabolic flow profile across the microchannel. This optimization is even more relevant for consecutive reactions. As infusion-based electrospray microchips are known to present great advantages in terms of sensitivity compared to standard ionization source, an ESI emitter microchip based on polymer photo-ablation was designed. First, the hyphenation of the chip in a LC-MS workflow was successfully achieved and evaluated by comparison with a standard pneumatically-assisted ESI source. To perform enhanced on-chip post-column derivatization of peptides, a substitute design to the sandwich mixer-reactor was explored to improve reaction in a microchip before ESI – MS analysis. The electrospray micromixer chip includes a passive mixing unit to perturbate the flow along the microchannel. The mixing efficiency was demonstrated by fluorescence imaging, and on-chip chemical derivatization of peptides and kinetic studies before mass spectrometry were achieved. The on-line LC-MS derivatization of cysteinyl peptides was shown to provide a more confident and accurate protein identification by adding information on the peptidic sequence. Within the development of electrospray microchips for mass spectrometry, many efforts have been put forward in the hyphenation of functional units. Immobilization of functionalized stationary phase in microfluidic systems is widely used to achieve protein or peptide isolation, sample cleaning, separation or reaction. In this context, magnetic beads have proven to be quite useful compared to other methods, such as immobilized packed beads or monoliths, because of their high and reversible magnetization, and various surface functionalization. A polymer microchip including a magnetic track array was designed to focus the magnetic field generated by permanent magnets towards precise locations along the microchannel. A multi-plug magnetic bead capture was obtained and a significant increase of bead capture efficiency was demonstrated both numerically and experimentally, which is beneficial for affinity separation applications, as example. The research in microfluidic front-end devices for mass spectrometry is actually oriented to the development of multi-spray interfaces for high-throughput analysis. An electrospray microchip with a multi-track array was developed. The capability of the device to screen alternatively up to six samples and to perform relative quantification was assessed. Soft ionization techniques have revolutionized the analysis of proteins by mass spectrometry. In contrast with the major content of the thesis dealing with microfluidic systems for protein analysis, the last chapter presents a novel ambient ionization method, so-called membrane-desorption electrospray ionization (M-DESI). The principle is similar to the desorption electrospray ionization (DESI) method. But, in the M-DESI approach the sample is desorbed directly from a mesh membrane positioned vertically and in-axis between the ESI emitter and the mass spectrometer inlet. Analysis of peptides and proteins was demonstrated as a proof-of-concept, offering great perspectives for detection after separation on membrane.

EPFL2009