A Review of Dynamic Experimental Techniques and Mechanical Behaviour of Rock Materials
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The constant improvement of polymer composite materials has allowed their integration in many industrial fields where their mechanical and chemical properties are apparently attractive. Mixed metal-composite insulators are now increasingly used for high vo ...
Solders are widely used as interconnect material for the electronic industry. The solder interconnect provides both electrical contact and mechanical connection between the integrated circuit devices and their substrate. Thus solders with good reliability ...
The origin of intragranular variations of the crystallographic orientation in hot-dip Al-Zn-Si coatings is discussed based on new experimental results and modelling. The solidification microstructure in as-received 55Al-43.4Zn-l.6Si (in wt.%) coatings depo ...
Probabilistic model of coating fragmentation under uniaxial tensile loading is developed. Analytical expressions of the crack spacing evolution are obtained for small-strain and large-strain fragmentation regimes. The model is applied for coating and inter ...
From airplanes to sailboats to bridges, composite materials have become a significant part of our everyday structures. With increasing demand, these materials are pushed to their limits to improve structural efficiency. As a consequence, research and devel ...
Search StringAdvanced >
Saved Searches >ARTICLE TOOLSGet PDF (641K)
Save to My Profile
E-mail Link to this Article
Export Citation for this Article
Get Citation Alerts
Request PermissionsMore Sharing ServicesShare
|
Share on citeuli ...
The conservation of historical monuments and especially natural stone masonry arch bridges is an issue which is becoming increasingly important. The prerequisite for any analysis of the load carrying capacity of such stonework is a precise knowledge of its ...
Hot tearing is one of the most severe defects observed in castings, e.g. in billets or sheet ingots of aluminum alloys produced by DC casting. It is due to both tensile strains and a lack of interdendritic feeding in the mushy zone. In order to predict thi ...
Diamond reinforced metals with a diamond content of 55-60 vol.% were made by gas driven liquid metal infiltration. They were characterized with regard to their stiffness, strength and fracture toughness as a function of diamond particle size and matrix all ...
Damage induced by desiccation (i.e. drying and cracking) is a ubiquitous issue in waste storage engineering. The fundamental mechanisms of the phenomenon of cracking during drying and the ways to control or avoid it are still elusive. This paper presents t ...
