Interaction between liquid aluminium and solid iron Al-rich intermetallics formation
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Twinned dendrites appearing in an Al-26 wt pct Zn alloy have been quenched during growth using a specifically designed setup that is positioned on top of a directional solidification experiment. X-ray tomography performed at the Swiss Light Source (SLS-bea ...
The aim of the thesis is to obtain more understanding about the influence of plastic deformation on the microstructural changes observed in single crystal (SX) Ni-based superalloys using diffraction techniques. This work was organised around two main probl ...
With recent developments in micro and nano-technologies, mechanical components such as those used in medicine or electronics tend to be miniaturized, requiring a new set of testing techniques to study their reliability and performance. One of the new metho ...
For environmental reasons, lead has been banned from microelectronic solder materials since the adoption of the RoHS legislation in 2006. A large number of investigations have lead to the development of new lead-free solder materials like the SnAgCu alloy ...
In the field of modern steelmaking, continuous casting has become the major manufacturing process to handle a wide range of steel grades. An important criterion characterizing the quality of semi-finished cast products is the macrosegregation forming at th ...
Thermally-induced residual stresses, generated during the industrial Direct Chill casting process of aluminum alloys, can cause both significant safety concerns as well as the formation of defects during down-stream processing. Although these thermally ind ...
Hermiticity is an essential requirement of a MEMS package for a device to work properly. Hermeticity also must be preserved during the operations following packaging, during which the package bond should not remelt. Bonding temperature is limited however t ...
A three-dimensional (3-D) coupled hydromechanical granular model has been developed and validated to directly predict, for the first time, hot tear formation and stress strain behavior in metallic alloys during solidification. This granular model consists ...
Five ternary Sn-0.7Cu-xNi alloys with nickel contents in the range 0-1000 ppm have been directionally solidified at different growth rates. The competition between primary tetragonal Sn cells/dendrites, eutectic and primary Cu6Sn5 is interpreted with phase ...
A novel combination of ink-jet printing (IJP) and micro-transfer moulding (μ-TM) for high-resolution, heterogeneous material microstructuring is demonstrated. First, IJP is used to accurately fill the micro-cavities in an elastomeric mould, thus avoiding t ...