Influence of Structural Variations in Push-Pull Zinc Porphyrins on Photovoltaic Performance of Dye-Sensitized Solar Cells

We designed and synthesized two new zinc porphyrin dyes for dye-sensitized solar cells (DSCs). Subtle molecular structural variation in the dyes significantly influenced the performance of the DSC devices. By utilizing these dyes in combination with a cobalt-based redox electrolyte using a photoanode made of mesoporous TiO2, we achieved a power conversion efficiency (PCE) of up to 12.0% under AM1.5G (100mWcm(-2)) simulated solar light. Moreover, we obtained a high PCE of 6.4% for solid-state dye-sensitized solar cells by using 2,2,7,7-tetrakis-(N,N-di-p-methoxyphenylamine)-9,9-spirobifluorene as a hole-transporting material.

Electronic and structural modification of titanium dioxide/zinc oxide photoanode for dye-sensitized solar cells

Aravind Kumar Chandiran

Dye-sensitized solar cells (DSC) are a new class of molecular photovoltaics that mimics the natural photosynthesis, for the direct conversion of sunlight into electricity. A typical DSC is a sandwich of a dye sensitized nanoparticle TiO2 film and a catalyst coated counter electrode, with a redox electrolyte filling the space in between. The high internal surface area of the mesoporous TiO2 film ensures higher dye uptake for an efficient light harvesting. Following the light illumination, an electron from the highest occupied molecular orbitals (HOMO) of the dye is excited to its lowest unoccupied molecular orbitals (LUMO). Due to an effective electronic orbital coupling between dye and TiO2, the excited electrons are injected into TiO2. The oxidized dye is regenerated by the electron donor present in the electrolyte. The circuit is completed by the transfer of photogenerated electrons in TiO2 via an external load, to counter electrode regenerating the oxidized electrolyte species. In a conventional DSC, the transport rate of the photogenerated electrons in TiO2 competes with the parasitic electron recombination, as these two processes occur at a similar ms time domain. This thesis work is aimed at the fundamental understanding of these electron transfer processes at sensitized photoanodes that were subject to different bulk and surface electronic structural modifications. The implications were shown to be of profound interest for the fabrication of high efficiency and low cost dye-sensitized solar cells. In the first part of the thesis, the bulk electronic structure of the anatase TiO2 nanoparticles is modified by the incorporation of different concentrations of aliovalent cations (Nb5+, Ga3+, Y3+) in the crystal lattice. The cationic doping/substitution in the nanoparticles is achieved by hydrothermal process. The modified nanoparticles retained the parent anatase crystal structure of TiO2. The transparent dye-sensitized solar cells made with these modified films, using our standard heteroleptic metal complex sensitizers and iodide/triiodide redox electrolyte, displayed enhanced photovoltaic performances, at certain added concentrations. Charge extraction measurements in DSC, reveals a formation of deeper trap states below the conduction band of titanium dioxide when Nb ion is incorporated into the TiO2 lattice. On the other hand, Ga3+ and Y3+ did not significantly affect the trap states distribution compared to the reference device. The modification in the trap states and the oxygen stoichiometry due to these cation inclusions significantly influenced the electron recombination and transport rates. These properties are investigated in detail using transient decay techniques. Following the study on the electronic structure of the bulk TiO2, the influence of the surface modification of the TiO2 nanoparticles on the electron transfer dynamics is investigated. The kinetics of electron recombination from TiO2 to the single electron redox shuttles is fast, leading to a significant loss in the open-circuit potential (VOC) of devices. The emergence of cobalt complexes as a potential electrolyte motivated us to investigate the role of surface passivation of the titanium dioxide nanoparticles. Insulating sub-nanometer oxide tunneling layers deposited by atomic layer deposition (ALD) are known to block the electron recombination, thereby, leading to an increase in the VOC and the collection efficiency of the solar cell. A general perception in the DSC community is that any insulating oxide layer can block the recombination. However, in this work, it is unraveled that, just the insulating property of oxides is not sufficient. In addition, the properties such as the conduction band position and the oxidation state of the insulating oxide, the electronic structural modification induced to the underlying TiO2 mesoporous film, modification of surface charges (isoelectric point) and charge of the electrolyte species have to be considered. A complete photovoltaic study has been done by depositing different cycles (by ALD) of four insulating oxides (Ga2O3, ZrO2, Nb2O5 and Ta2O5) and their recombination characteristics, surface electronic properties, transport rate and injection dynamics are investigated with a standard organic dye and Co2+/Co3+ redox mediator. A comparison is made with the conventional iodide/triiodide electrolyte. The second part of the thesis is focused at the development of new type of photoanodes for effective electron transport to increase the charge collection efficiency. We present a way of utilizing thin and conformal overlayer of titanium dioxide or zinc oxide on an insulating mesoporous template as a photoanode for dye-sensitized solar cells. Different thicknesses of TiO2 ranging from 1 to 15 nm are deposited on the surface of the template by ALD. This systematic study helps unraveling the minimum critical thickness of the TiO2 overlayer required to transport the photogenerated electrons efficiently. A merely 6 nm thick TiO2 film on a 3 μm mesoporous insulating substrate is shown to transport 8 mA/cm2 of photocurrent density along with ≈900 mV of open-circuit potential, when using our standard donor-π-acceptor sensitizer and Co(bipyridine)3 redox mediator. The three dimensional conformal shell on the insulating core also exhibits one order of magnitude higher transport rate compared to the conventional TiO2 nanoparticles. Similar nanostructures were made by depositing ZnO on an insulating template and the electron transfer properties are compared with titania. We also developed ALD recipe for the deposition of crystalline TiO2 or ZnO at low temperatures (< 200 °C) on arbitrary mesoporous insulating templates, considering their prospects of making photoanodes on flexible plastic substrates. The experience gained about the deposition of conformal and pin-hole free TiO2 layer in the previous section is extended for the high efficiency solid-state mesoscopic solar cells based on CH3NH3PbI3 perovskite absorbers. We show that a 2 nm as-deposited ALD overlayer on a mesoporous TiO2 film, printed on a bare conducting glass, is sufficient to arrest the recombination process that lead to a power conversion efficiency of 11.5 %. A detailed investigation on the electron back reaction is presented using electrochemical impedance spectroscopy.

EPFL2013

Investigation on Functionalized Ruthenium-Based Sensitizers to Enhance Performance and Robustness of Dye-Sensitized Solar Cells

Nuttapol Pootrakulchote

It has been increasingly aware to the world today that reserves of fossil fuels are limited and their use has serious environmental side effects. Encouraged by this realization was the evolution of the use of cleaner alternative energy, among which Dye-sensitized solar cells (DSCs) are potentially attractive candidates for the lower cost of producing devices which convert an abundant amount of energy from the sun into electricity. Dye-sensitizer in DSCs plays a crucial role as the chlorophyll in plants; to harvest solar light and transfer the energy via electron transfer to a suitable material (TiO2 in this case) to produce electricity. The topic of interest for this thesis is to further enhance the photovoltaic performance and the robustness of DSCs by tuning the optical properties of the dye-sensitizer (Ruthenium complex, in this case) using several strategies including an extension of the π-conjugation system, an introduction of antenna molecules and a modification of the Ru-complex structure. This work focuses on the DSC device fabrication and photovoltaic characterization in order to investigate more insight into structure-property-device performance relationship. New benchmarks for high performance DSCs with ruthenium complex sensitizers with π-extension in their ancillary ligands were presented. The overall conversion efficiency of 9.6% and 8.5% have been achieved with Ru-based sensitizer containing ethylenedioxythiophene, using low-volatile electrolyte and solvent-free electrolyte, respectively. The Rusensitizer functionalized with hexylthio-bithiophene unit exhibited a conversion efficiency of 9.4% with low-volatile electrolyte. All these devices showed good stability under prolonged light soaking at 60 °C. Extending π-conjugation of the anchoring ligand with thiophene units in monoleptic Ru-sensitizer also yields an impressive conversion efficiency of 6.1% using 3-µm-thin mesoporous TiO2 film in corporate with low-volatile electrolyte. DSC devices based on ruthenium sensitizers functionalized with thienothiophene- and EDOT-conjugated bridge, together with carbazole moiety on the ancillary ligands were found efficient with conversion efficiencies of 9.4% and 9.6%, respectively, in presence of a volatile electrolyte. The carbazole-functionalized ruthenium-based DCSs also performed excellently in the stability test using a low-volatile electrolyte. Furthermore, the Ru-complexes synthesized by click-chemistry in association with triazole-derivative moieties were successfully used as DCS sensitizers. DSC devices sensitized with these dyes provided the overall conversion efficiency close to 10% with volatile electrolyte. Further studies with solvent-free electrolyte showed notable device stability under extending full sunlight intensity at 60 °C. The results presented here provide a fertile base for further investigation, which will focus on improving the spectral response of ruthenium dye-sensitizer to full sunlight by searching for new strategies to modify the sensitizer with more efficient functional groups. The target is to reach higher conversion efficiency of DSC devices while retaining their stability under standard reporting conditions.

EPFL2012

Photoanode/Electrolyte Interface Stability in Aqueous Dye-Sensitized Solar Cells

Guido Viscardi

O'Regan and Gratzel conceived a dye-sensitized solar cell (DSSC), which operates as an artificial photosynthetic system converting solar light into electricity. Nevertheless, it is only recently that the scientific community is focusing on truly aqueous DSSCs that use water as electrolyte, thus avoiding any flammable and toxic organic solvents. The most critical aspect of these devices is the photoanode/electrolyte interface. Indeed, it is necessary to select dyes that chemisorb onto the semiconductor layer while allowing the aqueous electrolyte to thoroughly impregnate the mesostructure of the electrode; at the same time, it is necessary to avoid the anchoring unit of the dye to be hydrolyzed by water, thus causing the detachment of the sensitizer from the active material particles. This requires a thorough analysis of the structure-property relationships, in particular the evaluation of the chemical formula, stability, and performances of the dyes on the electrode surface in truly aqueous environment. Herein, we investigate nine different sensitizers, selected based on their different properties in terms of light absorption, chemical structure, and hydrophobic/hydrophilic nature. Wettability, resistance to dye desorption, and spectral variations of sensitized photoanodes, along with the photovoltaic performance of the resulting devices, are systematically investigated to identify some useful guidelines to choose and design suitable dyes of different colors for truly aqueous DSSCs.